Autobrite Direct Superfoam Dilution Ratios & User Guide

Autobrite Direct Superfoam dilution ratio and pH specification chart

슈퍼폼

Autobrite Direct Superfoam — Exterior : Foam, neutral pH, base dilution 1:5~1:7. At 1:5, mix about 200 ml of Autobrite Direct Superfoam per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/autobrite-direct/superfoam

Autobrite Direct 슈퍼폼 — Exterior : Foam, pH neutral, 기본 희석 1:5~1:7. 1:5 기준 물 1L당 Autobrite Direct 슈퍼폼 약 200ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/autobrite-direct/superfoam

Superfoam is a highly concentrated, pH-neutral pre-wash snow foam that removes traffic film, insects, light dust, and general grime from vehicle surfaces without any paint contact. Its blend of detergents, wetting agents, and sequestering agents generates a thick, stable mousse that clings to paintwork and safely lifts contaminants. LSP-safe and biodegradable, Superfoam carries a pleasant bubblegum fragrance and is ideal for regular maintenance washes.

슈퍼폼은 고농축 pH 중성 프리워시 스노우폼으로, 도장면 접촉 없이 교통 오염물, 벌레 자국, 먼지, 이물질을 제거합니다. 세제·습윤제·봉쇄제 복합 배합이 두껍고 안정적인 무스를 형성해 오염물을 안전하게 분리합니다. LSP(보호 코팅) 안전 및 생분해 가능한 성분이며, 상쾌한 버블검 향기가 특징으로 정기적인 유지 세차에 적합합니다.

Brand
Autobrite Direct
Categories
Exterior : Foam
Primary dilution
1:5~1:7
pH
neutral
Last updated
2026-06-14

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:5~1:71:5-7

Usage

  1. Pour 150–200 ml of Superfoam into the foam lance bottle and fill with cold water.
  2. Shake the lance bottle well to mix the solution.
  3. Pre-rinse the vehicle to remove any loose dirt.
  4. Apply foam evenly from top to bottom using the foam lance attached to a pressure washer.
  5. Allow the foam to dwell for 5–10 minutes.
  6. Rinse thoroughly with clean water before proceeding to the contact wash stage.

핵심 특징

  • 고농축 pH 중성 포뮬러
  • 유해 화학 성분 없음
  • 두껍고 안정적인 무스 형태의 폼
  • LSP 안전 — 왁스·실런트·코팅층 손상 없음
  • 생분해 가능
  • 교통 오염물, 벌레 자국, 먼지, 지문 제거
  • 상쾌한 버블검 향기
  • 폼 랜스 도포에 적합

사용법

  1. 슈퍼폼 150~200ml를 폼 랜스 통에 넣고 찬물로 가득 채웁니다.
  2. 랜스 통을 잘 흔들어 용액을 고루 섞습니다.
  3. 고압 세척기로 차량을 헹궈 느슨한 오염물을 제거합니다.
  4. 고압 세척기에 연결된 폼 랜스를 사용해 위에서 아래로 폼을 고르게 도포합니다.
  5. 오염물이 분리되도록 5~10분간 방치합니다.
  6. 접촉 세차 단계로 넘어가기 전에 깨끗한 물로 충분히 헹궈 폼을 모두 제거합니다.

Also known as: 오토브라이트, AGD, autobrite, auto brite, AD, Autobrite Direct Superfoam, Autobrite Superfoam, AD Superfoam, SF, Autobrite Direct SF, Autobrite SF, AD SF, 오토브라이트 다이렉트 슈퍼폼, 오토브라이트 슈퍼폼

한국어로 보기

Sources

Related products

More from Autobrite Direct

More Foam products

Explore more