3D Car Care AAT 501 Cutting Compound Dilution Ratios & User Guide
AAT 501 커팅 컴파운드
3D Car Care AAT 501 Cutting Compound — Exterior : Polishes, alkali pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/3d-car-care/aat-501-cutting-compound
3D Car Care AAT 501 커팅 컴파운드 — Exterior : Polishes, pH alkali. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/3d-car-care/aat-501-cutting-compound
A body-shop-safe cutting compound built around Adaptive Abrasive Technology, with no silicones or fillers. It addresses P1200 to P1500 sand scratches, swirls, and oxidation while keeping dust output low. The formula works with dual-action and rotary polishers, and in many cases finishes glossy enough to skip a separate polishing step.
실리콘과 필러 없이 적응형 연마 기술(AAT)을 적용한 보디샵 안전 커팅 컴파운드입니다. P1200~P1500 샌딩 자국, 스월, 산화를 다루며 분진 발생을 낮춥니다. 듀얼 액션과 로터리 머신 모두에 호환되며, 경우에 따라 추가 폴리싱 단계 없이도 광택 있는 마감을 냅니다.
- Brand
- 3D Car Care
- Categories
- Exterior : Polishes
- Primary dilution
- RTU
- pH
- alkali (9)
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-09-11
How it works
- Abrasive particles — Fine particles cut the surface to remove defects and oxidation.
- Petroleum solvent — Dissolves tar and grease; best not left to dwell on paint.
- Conditioning oil — Replenishes oils in leather and rubber to slow drying out.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| Aluminum Oxide | 1344-28-1 | Abrasive |
| Distallates (petroleum), hydrotreated light | 64742-47-8 | Solvent |
| White Mineral Oil (Petroleum) | 8042-47-5 | Emollient |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Adaptive Abrasive Technology (AAT)
- Body shop safe — silicone-free and filler-free
- Targets P1200 to P1500 sand scratches, swirls, and oxidation
- Low-dust formula
- Works with dual-action and rotary polishers
- Glossy finish may skip a separate polish step
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Polishes (primary) | RTU | 1:0 |
Usage
- Apply a few drops of AAT 501 to a cutting pad.
- Work the area using a dual-action or rotary machine, keeping the pad flat.
- Buff until 1200-1500 sand scratches, swirls, and oxidation are removed.
- Wipe away the low-dust residue with a clean microfiber towel.
- Follow with a finishing polish if a higher gloss is desired.
핵심 특징
- 적응형 연마 기술(AAT)
- 보디샵 안전 — 실리콘 및 필러 무첨가
- P1200~P1500 샌딩 자국, 스월, 산화 대응
- 저분진 배합
- 듀얼 액션 및 로터리 폴리셔 호환
- 별도 폴리싱 단계 없이도 광택 마감 가능
사용법
- AAT 501을 컷팅 패드에 몇 방울 도포합니다.
- 듀얼액션 또는 로터리 머신으로 패드를 평평하게 유지하며 작업합니다.
- 1200~1500 사포 자국, 스월, 산화가 제거될 때까지 버핑합니다.
- 저분진 잔여물을 깨끗한 마이크로파이버 타월로 닦아냅니다.
- 더 높은 광택이 필요하면 피니싱 폴리시로 마무리합니다.
Also known as: 3D, 3D Car Care AAT 501 Cutting Compound, 3D AAT 501 Cutting Compound, AAT 501, 3D Car Care AAT 501, 3D AAT 501, 3D카케어 AAT 501 커팅 컴파운드, 501OZ8
Sources
Related products
More from 3D Car Care
- GLW Series SiO2 Ceramic Trim Restore
- HYDRO-FIL Gray
- LVP Conditioner
- Wheel Kleen
- AAT 505 Correction Glaze
- ACA 510 Premium Rubbing Compound
More Polishes products
- Jax Wax Final Finish
- Armor All Ultra Shine Headlight Restoration Wipes
- Chemical Guys C4 Clear Cut Correction Compound
- Bilt Hamber Micro-Fine
- Ultra Coat Fine Cut
- Ganbass Level 3 Water-Soluble Polish