Car Gods Sectus 12K Fine Finish Cutting Compound Dilution Ratios & User Guide

Car Gods Sectus 12K Fine Finish Cutting Compound dilution ratio and pH specification chart

섹투스 12K 파인 피니시 컷팅 컴파운드

Car Gods Sectus 12K Fine Finish Cutting Compound — Exterior : Polishes. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/car-gods/sectus-12k-fine-finish-cutting-compound

Car Gods 섹투스 12K 파인 피니시 컷팅 컴파운드 — Exterior : Polishes. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/car-gods/sectus-12k-fine-finish-cutting-compound

Sectus 12K is a fine-cutting compound formulated to remove light surface marks and swirl marks for a high-gloss result on paintwork. Recommended as the third and final stage after the Sectus 9K Compound in a multi-step correction process, delivering a mirror-like finish. The silicone-free, diminishing abrasive formula with lubricants and coolants produces low dust and leaves no white marks or residue.

섹투스 12K는 도장면의 가벼운 흠집과 미세 스크래치를 제거하여 고광택 마감을 제공하는 미세 컷팅 컴파운드입니다. 섹투스 9K 이후 다단계 교정 작업의 세 번째이자 마지막 단계로 사용해 미러 마감을 구현합니다. 실리콘 무함유 분산 연마재와 윤활제, 냉각제가 배합되어 분진이 적고 백색 자국이나 잔여물이 남지 않습니다.

Brand
Car Gods
Categories
Exterior : Polishes
Primary dilution
RTU
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-07-31

Key features

Dilution

UseDilutionRatio
Exterior : Polishes (primary)RTU1:0

Usage

  1. Ensure the vehicle has been cleaned and dried thoroughly before starting.
  2. For best results, prime the surface with Car Gods Panel Spray first.
  3. Shake the bottle well before use.
  4. Apply 3–4 pea-sized amounts of compound to the fine cut pad; add more product if priming the pad for the first time.
  5. Work one small section at a time: start at low polisher speed, increase speed to work the compound, then reduce speed to finish once the compound is fully clear.
  6. Buff away any remaining haze with a clean, dry microfibre cloth before moving to the next section.

핵심 특징

  • 가벼운 흠집과 미세 스크래치 제거로 고광택 마감
  • 다단계 교정 시스템의 세 번째이자 마지막 단계
  • 실리콘 무함유 분산 연마재, 윤활제, 냉각제 함유
  • 분진 적고 비산 없으며 잔여물 최소화
  • 듀얼 액션 폴리셔 사용에 최적화
  • 백색 자국이나 얼룩 없음

사용법

  1. 작업 전 차량을 깨끗이 세차하고 완전히 건조시킵니다.
  2. 최상의 결과를 위해 카 갓즈 패널 스프레이로 표면을 먼저 전처리합니다.
  3. 사용 전 병을 충분히 흔들어 줍니다.
  4. 파인 컷 패드에 완두콩 크기의 컴파운드를 3~4개 도포합니다. 패드를 처음 사용하는 경우 더 많이 추가해 패드를 길들입니다.
  5. 한 번에 작은 구역씩 작업합니다. 낮은 속도로 시작해 속도를 높여 컴파운드를 작용시킨 후, 컴파운드가 완전히 투명해지면 속도를 낮춰 마무리합니다.
  6. 깨끗하고 건조한 마이크로파이버 천으로 남은 뿌연 자국을 닦아낸 뒤 다음 구역으로 이동합니다.

Also known as: 갓, gods, Car Gods Sectus 12K Fine Finish Cutting Compound, CG Sectus 12K Fine Finish Cutting Compound, Sectus 12K, Car Gods Sectus 12K, CG Sectus 12K, 카 갓즈 섹투스 12K 파인 피니시 컷팅 컴파운드, 카 갓즈 섹투스 12K

한국어로 보기

Sources

Related products

More from Car Gods

More Polishes products

Explore more