Bilt Hamber Interface
빌트 햄버 인터페이스 (플라스틱 접착 촉진제)
Interface is a chemically active adhesion promoter that creates a bonding layer for difficult polymer substrates where standard automotive paints would otherwise struggle. It addresses adhesion failure caused by plasticisers in modern plastics and reaches a working cure in around 15 minutes for fast process speed.
인터페이스는 일반 자동차 도료가 잘 붙지 않는 까다로운 폴리머 소재에 접착층을 형성해 주는 화학 활성 접착 촉진제입니다. 현대 플라스틱의 가소제 때문에 발생하는 도막 박리 문제를 해결하며 약 15분의 빠른 경화로 작업 속도를 높여 줍니다.
- Brand
- Bilt Hamber
- Categories
- Tools : Wash Supplies
Key features
- Chemically active bonding layer for polymers
- Helps prevent plasticiser-related coating failure
- Fast cure of about 15 minutes
- Works on a wide range of automotive plastics
- Easy aerosol application
Usage
- Make sure the polymer substrate is clean and free of dust, oils and release agents.
- Shake the aerosol thoroughly before use.
- Spray Interface from about 15 to 25 cm onto the substrate as a thin even coat.
- Wait about 15 minutes for cure before applying the next primer or topcoat.
핵심 특징
- 폴리머용 화학 활성 접착층
- 가소제 관련 도막 박리 방지
- 약 15분의 빠른 경화
- 다양한 자동차용 플라스틱과 호환
- 간편한 에어로졸 도포
사용법
- 플라스틱 또는 폴리머 표면의 먼지, 기름, 이형제를 모두 제거합니다.
- 사용 전 에어로졸을 충분히 흔듭니다.
- 약 15~25cm 거리에서 얇고 균일하게 분사 도포합니다.
- 약 15분 동안 경화시킨 뒤 프라이머 또는 상도를 도장합니다.