Armour Detail Supply Iron - Fallout Remover Dilution Ratios & User Guide

Armour Detail Supply Iron - Fallout Remover dilution ratio and pH specification chart

아이언 폴아웃 리무버

Armour Detail Supply Iron - Fallout Remover — Exterior : Remover, neutral pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/armour-detail-supply/iron-fallout-remover

Armour Detail Supply 아이언 폴아웃 리무버 — Exterior : Remover, pH neutral. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/armour-detail-supply/iron-fallout-remover

Iron is a pH-neutral fallout remover that breaks down embedded ferrous contaminants such as rail dust and brake dust on painted surfaces. Color-changing chemistry makes the decontamination visible, and added wetting agents extend dwell time so contaminants release more thoroughly. Use it as the chemical first step in a two-stage decontamination paired with a clay mitt.

아이언은 pH 중성 폴아웃 리무버로, 도장면에 박힌 레일 더스트나 브레이크 더스트 같은 철분 오염물을 분해합니다. 컬러 체인징 기술로 제염 과정을 눈으로 확인할 수 있고, 특수 습윤제가 드웰 타임을 늘려 오염물 제거 효과를 끌어올립니다. 클레이 미트로 이어지는 2단계 제염의 화학 단계로 사용합니다.

Brand
Armour Detail Supply
Categories
Exterior : Remover
Primary dilution
RTU
pH
neutral (7)
Where to buy
Search on Amazon (US)
Seen in use
The Most Satisfying BMW M3 Wash ASMR — Armour Detail Supply
Last updated
2026-07-31

How it works

  • Iron remover (turns purple) — Reacts with iron particles, turning purple with a distinct sulphur smell.

Disclosed ingredients

IngredientCASFunction
Ammonium thioglycolate (ammonium mercaptoacetate)126-97-6Reducing agent
Ethoxylated alcohol (alkyl chain unspecified)84133-50-6
Disodium 4,5-dihydroxybenzene-1,3-disulfonate (Tiron)149-45-1

Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.

Key features

  • pH-neutral formula
  • Removes embedded ferrous contaminants
  • Targets rail dust and brake dust
  • Color-changing chemistry
  • Wetting agents extend dwell time
  • Safe on painted surfaces
  • First step in two-stage decontamination

Dilution

UseDilutionRatio
Exterior : Remover (primary)RTU1:0

Usage

  1. Make sure the surface is clean, cool, and out of direct sunlight.
  2. Spray Iron directly onto the surface and let it react with contaminants for 3-5 minutes.
  3. Mist water periodically so the product does not dry on the surface.
  4. Flush all chemical residue away with a strong stream of water, including the crevices.
  5. For heavier contamination, work the product in with a damp microfiber towel or wash mitt.
  6. Repeat the process as needed.

핵심 특징

  • pH 중성 포뮬러
  • 박힌 철분 오염물 제거
  • 레일 더스트·브레이크 더스트 타깃
  • 컬러 체인징 기술
  • 드웰 타임을 늘리는 습윤제
  • 도장면에 안전
  • 2단계 제염의 첫 단계

사용법

  1. 차체가 깨끗하고 식은 상태에서 직사광선을 피해 작업합니다.
  2. 아이언을 표면에 분사하고 오염물과 3-5분간 반응시킵니다.
  3. 제품이 마르지 않도록 물을 미스트로 분사해 촉촉한 상태를 유지합니다.
  4. 강한 물줄기로 화학 잔여물을 틈새까지 완전히 헹궈냅니다.
  5. 오염이 심하면 젖은 마이크로파이버 타월이나 워시 미트로 문질러 작업합니다.
  6. 필요에 따라 반복합니다.

Also known as: Armour, 아머, 아머디테일, ADS, Armour-detail-supply, Iron, Armour Iron, Iron Fallout Remover, Fallout Remover, Iron Remover, 아이언, 아머 아이언, 폴아웃 리무버, 철분 제거제

한국어로 보기

Sources

  • Armour Detail Supply official product page
  • Safety Data Sheet (SDS / MSDS)

Related products

More from Armour Detail Supply

  • Armour 4.5 Gallon CRYSTAL Bucket
  • Wheel Cleaner
  • Trim+ Coating - Trim Restore
  • Glass Coating
  • Tire+
  • HERO - Rinseless Wash

More Remover products

  • Aqua Car Cosmetic Bloody Iron
  • Aqua Car Cosmetic APC Sour
  • PRIMA Car Care Amigo
  • Detail Kitchen Iron Brew
  • Detail Kitchen TarTar Sauce
  • SWAG BASIC TAR GLUE REMOVER

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)