ADBL 원 컷 프로 희석비 & 사용 가이드

ADBL 원 컷 프로 희석비 pH 스펙 카드

One Cut Pro

원 컷 프로는 경도가 높은 클리어 코트 및 아크릴 도장면용 컷 앤 폴리싱 컴파운드로, P1000 샌딩 자국을 포함한 까다로운 결함을 제거합니다. 피니싱 전 전처리 단계로도, 원스텝 제품으로도 쓸 수 있으며 저분진, 긴 작업 시간, 손쉬운 닦아내기가 특징입니다. 수성이며 폴리머가 들어가지 않은 성분입니다.

브랜드
ADBL
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 희석 없이 그대로 사용하며 사용 전 충분히 흔들어 줍니다.
  2. 프라이밍하지 않은 패드에 40 x 40 cm 패널당 최대 4방울을 도포합니다.
  3. 깨끗한 표면에서 DA 또는 회전식 머신으로 작업하며 직사광선을 피합니다.
  4. 연마 후 남은 컴파운드를 제거하기 위해 도장면을 탈지합니다.

One Cut Pro is a cutting and polishing compound made for harder clear coat and acrylic paints, capable of clearing demanding defects including P1000 sanding marks. It can run as a preparatory step before finishing or as a single-step product, with low dust, a long working time, and easy wipe-off. The formula is water-based and free of polymers.

Key features

  • Removes P1000 sanding marks
  • Suited to harder paint
  • Use as preparatory or single-step product
  • Low dust
  • Long working time
  • Easy wipe-off
  • Water-based, polymer-free
  • Works with rotary and DA machines using wool, microfiber, or foam pads

Usage

  1. Use as is without dilution; shake well before use.
  2. Apply to an unprimed pad, using up to 4 drops per 40 x 40 cm panel section.
  3. Work the compound on a clean surface with a dual-action or rotary machine, avoiding direct sunlight.
  4. After polishing, degrease the paint to remove any compound residue.

다른 이름: ADBL One Cut Pro, OCP, ADBL OCP, 에이디비엘 원 컷 프로, ADB000653

View in English

출처

관련 제품

ADBL의 다른 제품

같은 카테고리(Polishes) 제품

더 보기