Adam's Proline CUT - Cutting Compound
아담스 프로라인 CUT - 컷팅 컴파운드
Adams Proline CUT is an aggressive cutting compound engineered for severe paint defects, deep oxidation, and heavy scratches that standard compounds cannot adequately address. Despite its high cutting power, it retains controlled working behavior throughout the polishing cycle to prevent overworking the paint. CUT is the right choice for restoration projects, older vehicles, and heavily neglected finishes.
아담스 프로라인 컷은 일반 컴파운드로는 해결하기 어려운 심각한 도장 결함, 깊은 산화, 무거운 스크래치를 위해 설계된 강력한 절삭 컴파운드입니다. 높은 절삭력에도 불구하고 전체 폴리싱 사이클 동안 제어된 작업 특성을 유지하여 도장을 과도하게 손상시키지 않습니다. 복원 프로젝트, 오래된 차량, 심하게 방치된 마감에 적합한 선택입니다.
- Brand
- Adam's Polishes
- Categories
- Exterior : Polishes
Key features
- Maximum heavy cutting strength
- Removes deep scratches and severe defects
- Ideal for neglected or aged paint
- Works well with microfiber cutting pads
- Delivers fast professional-level correction
Usage
- Start on a clean, freshly clayed surface free of large particles or embedded dirt.
- Apply about four pea-sized drops of CUT across a heavy-cut wool pad or microfiber cutting pad.
- Prime the pad with a light mist of detail spray and spread the compound over a roughly 2-by-2-foot area at low speed.
- Polish at speed 5 to 6 with moderate downward pressure using overlapping passes until the compound goes clear.
- Wipe residue with a clean microfiber towel and follow with a correcting or finishing polish to refine the surface.
핵심 특징
- 최대 강력 절삭력
- 깊은 스크래치 및 심각한 결함 제거
- 방치되거나 노후된 도장에 적합
- 마이크로파이버 커팅 패드와 잘 어울림
- 빠른 전문가 수준 교정
사용법
- 굵은 이물질이 없는 깨끗하고 갓 클레이 처리된 표면에서 시작합니다.
- 헤비 컷 울 패드나 마이크로파이버 커팅 패드에 컷을 완두콩 크기로 약 4방울 도포합니다.
- 디테일 스프레이를 가볍게 분사해 패드를 프라이밍하고 저속으로 약 60x60cm 구역에 컴파운드를 펼칩니다.
- 속도 5~6에서 적당한 압력으로 겹침 패스를 반복하여 컴파운드가 투명해질 때까지 폴리싱합니다.
- 마이크로파이버 타월로 잔여물을 닦고 교정 또는 피니싱 폴리시로 마감을 정리합니다.