Adam's Polishes Adam's Ceramic Spray Coating Dilution Ratios & User Guide

Adam's Polishes Adam's Ceramic Spray Coating dilution ratio and pH specification chart

아담스 세라믹 스프레이 코팅

Adam's Polishes Adam's Ceramic Spray Coating — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/adam-s-polishes/adam-s-ceramic-spray-coating

Adam's Polishes 아담스 세라믹 스프레이 코팅 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/adam-s-polishes/adam-s-ceramic-spray-coating

Adams Ceramic Spray Coating is a solvent-based sprayable ceramic formula that provides up to about 12 months of extreme gloss, hydrophobic water behavior, and durable protection with a rapid 1 to 2 minute flash time between coats. It can be applied by hand or by machine and works on paint, glass, wheels, and plastic trim.

솔벤트 기반 스프레이형 세라믹 코팅으로, 코트 사이 약 1~2분의 빠른 플래시 타임을 가지며 최대 약 12개월의 극강 광택·발수·내구 보호를 제공합니다. 손이나 기계로 도장·유리·휠·플라스틱 트림 모두에 적용할 수 있습니다.

Brand
Adam's Polishes
Categories
Exterior : Coating
Primary dilution
RTU
Where to buy
Search on Amazon (US)
Last updated
2026-08-14

How it works

  • Polysilazane — Cures into a hard inorganic film.
  • Solvent-based — Built mainly on organic solvents; ventilate and spot-test on interior plastics.

Disclosed ingredients

IngredientCASFunction
decamethylcyclopentasiloxane541-02-6Silicone carrier
light64742-47-8Solvent
parachlorobenzotrifluoride98-56-6Solvent
orange oil8028-48-6Solvent
orange oil68647-72-3Fragrance
Polyurea polysilazane2649792-57-2Film former

Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.

Key features

  • Solvent-based sprayable ceramic coating
  • Up to about 12 months of protection
  • Extreme gloss and hydrophobic properties
  • Rapid 1 to 2 minute flash time
  • Hand or machine applicable
  • Works on paint, glass, wheels, and trim

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU1:0

Usage

  1. Ensure the surface is thoroughly cleaned, decontaminated, and corrected before applying the ceramic coating.
  2. Apply the ceramic spray coating to a foam or microfiber applicator and spread it thinly and evenly over one section at a time.
  3. Allow the coating to flash for about 1 to 2 minutes until it begins to show high spots, then level with a clean microfiber towel.
  4. Buff with a second clean microfiber towel to reveal the full gloss and hydrophobic finish.
  5. Allow the coating to cure for the recommended period before exposing the vehicle to water or harsh conditions.

핵심 특징

  • 솔벤트 기반 스프레이형 세라믹 코팅
  • 최대 약 12개월 보호
  • 극강 광택 및 발수 특성
  • 약 1~2분의 빠른 플래시 타임
  • 핸드 또는 머신 적용 가능
  • 도장·유리·휠·트림 모두 적용 가능

사용법

  1. 세라믹 코팅 적용 전 표면을 철저히 세정·탈지·보정하세요.
  2. 폼 또는 극세사 어플리케이터에 코팅을 도포하고 한 번에 한 섹션씩 얇고 균일하게 펴 바르세요.
  3. 약 1~2분간 플래시하여 하이스팟이 나타나기 시작하면 깨끗한 극세사 타올로 레벨링하세요.
  4. 두 번째 깨끗한 극세사 타올로 버핑하여 완전한 광택과 발수 마감을 완성하세요.
  5. 수분이나 혹독한 환경에 노출되기 전 권장 경화 기간 동안 기다리세요.

Also known as: ap, adams, adam's, adams-polish, 아담스, 아담스 폴리시, 아담스 폴리쉬, CSC, Adam's CSC, Ceramic Spray Coating, Adam's Ceramic Spray, 아담스 CSC, 세라믹 스프레이 코팅, 아담스 세라믹 코팅, 아담스 CSC 스프레이

한국어로 보기

Sources

  • Adam's Polishes official product page
  • Safety Data Sheet (SDS / MSDS)

Related products

More from Adam's Polishes

  • Adam's Proline BITE - Acid Wheel Cleaner and Brightener
  • Adam's UV Ceramic Spray Coating
  • Rinse + Coat
  • Adam's CS3
  • Adam's Black Trim Restorer
  • Graphene Ceramic Glass Coating Advanced

More Coating products

  • SPASHAN Super Glass Wear
  • Shelby Ultimate Ceramic Coating
  • Squid Ink Pro-Seal
  • Soft99 QJUTSU BODY COAT PRO
  • Jax Wax Liquid Carnauba Wax
  • TAMAROU Swag Coating

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)