Find Your Detail · 제품 카탈로그 · 브랜드 · 실사용 영상 · 소개

Adam's Polishes 아담스 세라믹 스프레이 코팅 희석비 & 사용 가이드

Adam's Polishes 아담스 세라믹 스프레이 코팅 희석비 pH 스펙 카드

Adam's Ceramic Spray Coating

솔벤트 기반 스프레이형 세라믹 코팅으로, 코트 사이 약 1~2분의 빠른 플래시 타임을 가지며 최대 약 12개월의 극강 광택·발수·내구 보호를 제공합니다. 손이나 기계로 도장·유리·휠·플라스틱 트림 모두에 적용할 수 있습니다.

브랜드
Adam's Polishes
카테고리
Exterior : Coating
기본 희석 비율
RTU
구매(한국)
쿠팡에서 검색
최종 업데이트
2026-08-14

작용 방식

  • 폴리실라잔 — 경화되며 단단한 무기 피막을 형성합니다.
  • 용제 기반 — 유기 용제가 주로 쓰인 제품입니다. 실내·플라스틱에는 환기와 시험 도포를 권합니다.

공개 성분

성분CAS역할
decamethylcyclopentasiloxane541-02-6실리콘 캐리어
light64742-47-8용제
parachlorobenzotrifluoride98-56-6용제
orange oil8028-48-6용제
orange oil68647-72-3향료
Polyurea polysilazane2649792-57-2피막 형성제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 솔벤트 기반 스프레이형 세라믹 코팅
  • 최대 약 12개월 보호
  • 극강 광택 및 발수 특성
  • 약 1~2분의 빠른 플래시 타임
  • 핸드 또는 머신 적용 가능
  • 도장·유리·휠·트림 모두 적용 가능

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 세라믹 코팅 적용 전 표면을 철저히 세정·탈지·보정하세요.
  2. 폼 또는 극세사 어플리케이터에 코팅을 도포하고 한 번에 한 섹션씩 얇고 균일하게 펴 바르세요.
  3. 약 1~2분간 플래시하여 하이스팟이 나타나기 시작하면 깨끗한 극세사 타올로 레벨링하세요.
  4. 두 번째 깨끗한 극세사 타올로 버핑하여 완전한 광택과 발수 마감을 완성하세요.
  5. 수분이나 혹독한 환경에 노출되기 전 권장 경화 기간 동안 기다리세요.

Adams Ceramic Spray Coating is a solvent-based sprayable ceramic formula that provides up to about 12 months of extreme gloss, hydrophobic water behavior, and durable protection with a rapid 1 to 2 minute flash time between coats. It can be applied by hand or by machine and works on paint, glass, wheels, and plastic trim.

Key features

  • Solvent-based sprayable ceramic coating
  • Up to about 12 months of protection
  • Extreme gloss and hydrophobic properties
  • Rapid 1 to 2 minute flash time
  • Hand or machine applicable
  • Works on paint, glass, wheels, and trim

Usage

  1. Ensure the surface is thoroughly cleaned, decontaminated, and corrected before applying the ceramic coating.
  2. Apply the ceramic spray coating to a foam or microfiber applicator and spread it thinly and evenly over one section at a time.
  3. Allow the coating to flash for about 1 to 2 minutes until it begins to show high spots, then level with a clean microfiber towel.
  4. Buff with a second clean microfiber towel to reveal the full gloss and hydrophobic finish.
  5. Allow the coating to cure for the recommended period before exposing the vehicle to water or harsh conditions.

다른 이름: ap, adams, adam's, adams-polish, 아담스, 아담스 폴리시, 아담스 폴리쉬, CSC, Adam's CSC, Ceramic Spray Coating, Adam's Ceramic Spray, 아담스 CSC, 세라믹 스프레이 코팅, 아담스 세라믹 코팅, 아담스 CSC 스프레이

View in English

출처

  • Adam's Polishes 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

Adam's Polishes의 다른 제품

  • Graphene Ceramic Glass Coating
  • Adam's Medium Grade Clay Bar
  • Adam's All Purpose Cleaner
  • Adam's Fine Grade Clay Bar
  • Adam's Spray Wax
  • Adam's Wheel & Tire Cleaner

같은 카테고리(Coating) 제품

  • Innova Car SiNH Base Coat
  • McKee's 37 Fast Gloss Ceramic Sealant
  • AMMO AMMO BLUSH PRO FINISHING WAX
  • Swissvax Viking
  • ValetPRO Intelijet Ceramic 360
  • Nasiol TempoRoad

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)