Vonixx 브이컷 희석비 & 사용 가이드

Vonixx 브이컷 희석비 pH 스펙 카드

V-Cut

V-Cut은 VHP(Voxer Hybrid Polish) 기술 기반의 헤비 컷 컴파운드로, 다수의 독일차에서 볼 수 있는 단단한 클리어 코트 작업을 위해 만들어졌습니다. P1200 이상의 샌드페이퍼 자국, 깊은 흠집, 스월 마크를 신속히 제거하면서 한 단계 작업으로도 정제된 마감을 구현합니다. VOC 프리, 무분진 포뮬러로 패드 선택에 따라 폴리싱 단계에도 사용할 수 있습니다.

브랜드
Vonixx
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 사용 전 제품을 충분히 흔들어 줍니다.
  2. 폴리싱 패드에 제품을 4~5방울 떨어뜨려 고르게 펴 바릅니다.
  3. 로터리 폴리셔(800~1800 rpm) 또는 듀얼액션 폴리셔(3000~4800 OPM)로 60×60cm 이하 구역씩 작업합니다.
  4. 원하는 교정 수준이 될 때까지 적당한 압력으로 폴리싱합니다.
  5. 필요하면 작업을 반복하고 깨끗한 극세사 타월로 잔여물을 닦아냅니다.

V-Cut is a heavy-cut compound built on VHP (Voxer Hybrid Polish) technology, designed for hard clear coats such as those used on many German vehicles. It quickly removes P1200-grit or finer sanding marks, deeper marks, and swirls while leaving a refined finish in a single step. The VOC-free, non-dusting formula can also serve as a polish depending on the pad.

Key features

  • Heavy cut on hard clear coats
  • VHP (Voxer Hybrid Polish) technology
  • Removes P1200 or finer sanding marks and deeper swirls
  • Refined finish in a single step
  • Can also be used as a polish depending on the pad
  • VOC free
  • Non-dusting formula

Usage

  1. Shake the product well before use.
  2. Apply 4–5 drops of product to the polishing pad and spread evenly.
  3. Use a rotary polisher (800–1800 rpm) or dual-action polisher (3000–4800 OPM), working sections no larger than 60×60 cm.
  4. Polish with appropriate pressure until the desired correction is reached.
  5. Repeat if needed and wipe residue away with a clean microfiber towel.

다른 이름: 보닉스, Vonix, Vonixx V-Cut, 보닉스 브이컷

View in English

출처

관련 제품

Vonixx의 다른 제품

같은 카테고리(Polishes) 제품

더 보기