브이텐
V10
V10은 아시아 및 소프트 클리어 코트용 헤비컷 컴파운드로, P1200 이상의 샌딩 자국, 스월 마크, 도장 결함 제거에 사용합니다. 윤활 성분이 풍부한 포뮬라로 분진 발생과 패드 막힘이 적어 장시간 작업이 가능하고, 듀얼액션과 로터리 폴리셔 모두 호환됩니다.
- 브랜드
- Vonixx
- 카테고리
- Exterior : Polishes
- 기본 희석 비율
- RTU
핵심 특징
- 아시아 및 소프트 클리어 코트용 헤비컷 컴파운드
- P1200 이상 샌딩 자국·스월·도장 결함 제거
- 장시간 작업을 돕는 높은 윤활성
- 낮은 분진과 적은 패드 막힘
- 듀얼액션·로터리 폴리셔 호환
희석 비율
- Exterior : Polishes — RTU (1:0) (기본)
사용법
- 사용 전 용기를 충분히 흔들어 줍니다.
- 도장 표면 전체를 깨끗이 세척합니다.
- 듀얼액션 폴리셔(3000~4800 OPM) 또는 로터리 폴리셔(1200~1800 rpm)에 컷팅 또는 폴리싱 패드를 장착하고 50×50cm 구역씩 작업합니다.
- 원하는 광택이 나타날 때까지 적당한 압력으로 폴리싱합니다.
- 필요하면 작업을 반복하고 극세사 타월로 남은 컴파운드를 닦아냅니다.
V10 is a heavy-cut compound formulated for Asian and soft clear coat systems, helping remove P1200-grit or finer sanding marks, swirls, and similar paint defects. Its lubricant-rich formula supports extended work time with low dust and limited pad clogging, and works with both dual-action and rotary polishers.
Key features
- Heavy-cut compound for Asian and soft clear coats
- Removes P1200 or finer sanding marks, swirls, and paint defects
- High lubricity for extended work time
- Low dust and limited pad clogging
- Works with dual-action and rotary polishers
Usage
- Shake the bottle well before use.
- Wash the paint surface thoroughly.
- Attach a cutting or polishing pad to a dual-action polisher (3000–4800 OPM) or rotary polisher (1200–1800 rpm) and work 50×50 cm sections.
- Polish with moderate pressure until the desired gloss appears.
- Repeat if needed and wipe excess compound off with a microfiber towel.
다른 이름: 보닉스, Vonix, Vonixx V10, 보닉스 브이텐
View in English