Vonixx 브이-플라스틱 프로 희석비 & 사용 가이드

Vonixx 브이-플라스틱 프로 희석비 pH 스펙 카드

V-Plastic PRO

V-Plastic PRO는 플라스틱 표면을 위한 반영구 세라믹 코팅으로, 외부 플라스틱에 약 3년, 내부 플라스틱에 약 5년 정도 복원과 보호를 제공합니다. UV 저항과 발수·방오 기능을 더하며 신구 플라스틱 모두의 열화를 늦추는 데 도움을 줍니다. 범퍼, 트림, 대시보드, 도어 패널, 비닐 랩에 사용할 수 있습니다.

브랜드
Vonixx
카테고리
Interior : Trim Sealants, Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Interior : Trim Sealants (기본)RTU1:0

사용법

  1. 시공 전 플라스틱 표면을 깨끗이 세척합니다.
  2. IPA 기반 전처리제와 극세사 타월로 잔여물과 이물질을 제거합니다.
  3. 동봉된 폼 어플리케이터 패드로 전체 표면에 제품을 균일하게 도포합니다.
  4. 광택을 줄이려면 깨끗하고 건조한 극세사 타월로 여분을 닦아냅니다.
  5. 필요 시 첫 도포 3시간 이후 2차 코팅을 진행하고, 약 6시간 부분 경화와 약 72시간 완전 경화 동안 차량을 젖지 않게 유지합니다.

V-Plastic PRO is a semi-permanent ceramic coating designed for plastic surfaces, providing restoration and protection for up to around 3 years on exterior plastics and up to around 5 years on interior plastics. The formula adds UV resistance and water and dirt repellency, and helps slow degradation on both new and aged plastics. It is suitable for bumpers, trims, dashboards, door panels, and vinyl wraps.

Key features

  • Semi-permanent plastic coating around 3 years exterior and 5 years interior
  • UV resistance and degradation defense
  • Water and dirt repellency
  • For bumpers, trims, dashboards, door panels, and vinyl wraps
  • Foam applicator pad included

Usage

  1. Clean the plastic surface thoroughly before application.
  2. Decontaminate the surface with an IPA-based prep and a microfiber towel to remove residues.
  3. Apply the product evenly across the surface using the included foam applicator pad.
  4. For a matte finish, wipe excess with a clean dry microfiber towel.
  5. If needed, apply a second coat at least 3 hours after the first; allow about 6 hours partial cure and around 72 hours full cure, keeping the vehicle dry.

다른 이름: 보닉스, Vonix, Vonixx V-Plastic PRO, 보닉스 브이-플라스틱 프로

View in English

출처

관련 제품

Vonixx의 다른 제품

같은 카테고리(Trim Sealants) 제품

더 보기