Dr. Beasley's NSP 코어컷 플러스 사용 가이드

Dr. Beasley's NSP 코어컷 플러스 희석비 pH 스펙 카드

NSP CoreCut+

NSP 코어컷 플러스는 완전 무기질 컴파운딩 프라이머로, 연마 입자 크기를 키우지 않고도 다면체 연마재를 사용해 자동차 도장과 선박 젤코트의 깊은 결함을 공격적으로 제거합니다. 100% 무기질 포뮬러는 유성 잔여물을 남기지 않아 세라믹 코팅 전 IPA 패널 와이프가 필요 없습니다. 또한 세라믹 코팅 결합력을 강화하는 앵커 포인트를 형성합니다.

브랜드
Dr. Beasley's
카테고리
Exterior : Polishes
구매(한국)
쿠팡에서 검색
최종 업데이트
2026-08-14

작용 방식

  • 유성(석유계) 용제 — 타르·기름때를 녹이며, 도장면에 오래 두지 않는 것이 좋습니다.
  • 용제 기반 — 유기 용제가 주로 쓰인 제품입니다. 실내·플라스틱에는 환기와 시험 도포를 권합니다.

공개 성분

성분CAS역할
C12-C14 Isoalkanes68551-19-9용제
Dipropylene glycol monomethyl ether34590-94-8용제
Naphtha (petroleum) hydrotreated heavy64742-48-9용제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 깊은 정밀 컷팅을 위한 다면체 연마재
  • 1200방 샌딩 자국 제거 가능
  • 자동차 도장 및 선박 젤코트에 효과적
  • 100% 무기질 포뮬러, 유성 잔여물 없음
  • 코팅 전 IPA 패널 와이프 불필요
  • 세라믹 코팅 앵커 포인트 형성

사용법

  1. 컷팅 패드에 NSP 코어컷 플러스를 소량 도포하세요.
  2. 폴리셔를 사용해 적절한 속도로 결함이 있는 도장면에 컴파운드를 작업하세요.
  3. 결함이 제거되고 원하는 교정 수준에 도달할 때까지 버핑을 계속하세요.
  4. 깨끗한 마이크로파이버 타월로 잔여물을 닦아내세요 — 세라믹 코팅 전 IPA 와이프는 필요하지 않습니다.

NSP CoreCut+ is a fully inorganic compounding primer that uses hyperfaceted abrasives to aggressively level deep defects in automotive paint and marine gelcoat without increasing abrasive particle size. The 100% inorganic formula leaves no oil-based residue, eliminating the need for an IPA panel wipe before ceramic coating application. It also deposits anchor points to strengthen the ceramic coating bond.

Key features

  • Hyperfaceted abrasives for deep precision cut
  • Levels 1200-grit sanding marks
  • Effective on automotive paint and marine gelcoat
  • 100% inorganic formula, no oil residue
  • No IPA panel wipe required before coating
  • Primes surface with ceramic coating anchor points

Usage

  1. Apply a small amount of NSP CoreCut+ to a cutting pad.
  2. Work the compound into the defective paint surface with a polisher at an appropriate speed.
  3. Continue buffing until the defects are leveled and the surface reaches the desired correction level.
  4. Wipe residue with a clean microfiber towel — no IPA wipe is needed before proceeding to ceramic coating.

다른 이름: 닥터 비슬리, 비슬리, Beasley, dr Beasley, Beasley's, Dr. Beasley's NSP CoreCut+, 닥터 비즐리 NSP 코어컷 플러스

View in English

출처

  • Dr. Beasley's 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

Dr. Beasley's의 다른 제품

  • Fresh Start Garage
  • Buff and Shine EdgeGuard Yellow Polishing Foam Pad
  • Wheel Brush
  • All Surface Detailing Brush
  • Tire Scrub Brush
  • Salt Chisel

같은 카테고리(Polishes) 제품

  • 3D Car Care Marine & RV Cutting Compound
  • McKee's 37 BEAST Compound
  • McKee's 37 Graphene 3-In-1 Ceramic Polish
  • FX Protect Medium Cut Pad
  • P&S Ballistic Max Cut Compound
  • P&S Smart Extra Cut Compound

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)