ProStaff 몬스터 리바이브 사용 가이드

MONSTER REVIVE
샴푸로는 지워지지 않는 유분 오염을 제거하면서 광택과 발수 효과를 한 번에 부여하는 클리너 겸 하지 코팅제입니다. 마이크로 미립자 파우더가 도장면에 붙은 물때와 빗자국, 흐림의 원인이 되는 유분 오염을 제거하고 미세한 흠집을 메워 눈에 덜 띄게 합니다. 남은 피막이 프라이머 역할을 해 이후 시공하는 코팅제의 밀착력과 지속력을 높여 줍니다.
- 브랜드
- ProStaff
- 카테고리
- Exterior : Polishes, Exterior : Coating
- 최종 업데이트
- 2026-07-21
핵심 특징
- 한 번의 시공으로 클리너와 하지 코팅 동시 처리
- 마이크로 미립자 파우더로 유분성 물때와 빗자국 제거
- 미세한 흠집을 메워 눈에 덜 띄게 함
- 광택과 발수 효과 부여
- 오버코트의 밀착력과 지속력 향상
- 도어 바이저와 외장 도금 파츠에도 사용 가능
사용법
- 차체에 물을 뿌려 모래와 진흙, 먼지를 씻어낸 뒤 물기를 제거하세요.
- 캡을 누른 채 용기를 잘 흔들고 열어 동봉된 천에 액을 1cm 정도 묻히세요.
- 약 30cm 사방을 기준으로 펴 바른 다음 문질러 오염을 제거하세요.
- 천의 깨끗한 면으로 바꿔 표면을 닦아 마무리하세요.
- 사용 후에는 캡을 닫고 비누로 손을 씻으세요.
A cleaner and primer coat that removes the oily grime shampoo leaves behind while adding gloss and water repellency in a single pass. Micro-particle abrasive powder strips the oil-bound water marks, rain stains and dullness on the paint and fills fine scratches so they show less. The film it leaves acts as a primer, so a follow-up coating product bonds better and lasts longer.
Key features
- Cleaner and primer coat in one application
- Micro-particle powder removes oil-bound water marks and rain stains
- Fills fine scratches to make them less visible
- Adds gloss and water repellency
- Improves adhesion and durability of an over-coat
- Also works on door visors and exterior plated parts
Usage
- Rinse the body to wash off sand, mud and dust, then remove the remaining water.
- Hold the cap, shake the bottle well, open it and put about 1 cm of liquid on the cloth.
- Spread over roughly a 30 cm square, then polish to lift the grime.
- Switch to a clean face of the cloth and buff the panel off.
- Close the cap after use and wash your hands with soap.
다른 이름: 프로스태프, PROSTAFF MONSTER REVIVE, 프로스태프 몬스터 리바이브, S225
출처
관련 제품
ProStaff의 다른 제품
- MONSTER Bungee Pad
- Wet Cloth
- BREATH MONSTER Cartridge Luminous Musk
- Polymer Maintenance Fiber Cloth
- RAKUNORI BUCKET
- SAKIGAKE MIGAKIJUKU Headlight Compound
같은 카테고리(Polishes) 제품
- PROVIDE Extend
- POLYTOP Polymer-Hochglanz 2000
- Koch Chemie Gelcoat Finish
- PAICAR 01 Heavy Cut
- KiurLab MEDIUM CUT / ONE STEP
- NV Precision | Foam Cutting Compound