ProStaff 엑스말1 코팅 웻 클로스 사용 가이드

ProStaff 엑스말1 코팅 웻 클로스 희석비 pH 스펙 카드

XMAL1 COATING WET CLOTH

차체를 닦으면서 동시에 코팅 효과까지 남기는 물티슈형 와이프입니다. 스프레이 타입 엑스말1 코팅과 동일한 유리계 폴리머를 함유해 투명한 광택과 강한 발수력을 제공합니다. 100% 마이크로파이버 소재에 연마제와 석유계 용제를 쓰지 않은 중성 제품이라 물자국과 벌레, 새 배설물 자국을 제거하면서도 코팅 시공 차량이나 오토바이, 자전거에 안심하고 사용할 수 있습니다.

브랜드
ProStaff
카테고리
Exterior : Rinseless&Waterless, Exterior : Coating
pH
neutral
최종 업데이트
2026-07-21

핵심 특징

사용법

  1. 상단 씰을 젖히고 시트를 한 장씩 꺼내세요.
  2. 시트를 네 겹으로 접어 오염을 걷어내듯이 닦아내세요.
  3. 시트가 더러워지면 깨끗한 면으로 바꾸고, 오염이 심하면 두 번째 시트로 마무리하세요.
  4. 사용 후에는 손을 씻고 꺼내는 입구의 씰을 완전히 닫으세요.

A pre-moistened wipe that cleans the car body and leaves a coating effect in a single pass. It carries the same glass-based polymer used in the spray-type X-mal1 coating, giving a clear shine and strong water repellency. Made from 100% microfiber and free of petroleum solvents and abrasives, it lifts stubborn water spots and insect or bird droppings and is safe on coated cars, motorcycles, and bicycles.

Key features

  • Cleans and coats in one wipe
  • Glass-based polymer for shine and water repellency
  • 100% microfiber material
  • Removes stubborn water stains and insect/bird droppings
  • No abrasives and no petroleum solvents, safe on coated cars
  • Usable on exterior, interior, motorcycles, and bicycles

Usage

  1. Peel back the top seal and pull out one sheet at a time.
  2. Fold the sheet into quarters and wipe the surface so the dirt lifts away.
  3. Turn to a clean face as it soils; on heavy dirt, finish with a second sheet.
  4. Wash your hands after use and reseal the opening completely.

다른 이름: 프로스태프, PROSTAFF XMAL1 COATING WET CLOTH, XCWC, PROSTAFF XCWC, 프로스태프 엑스말1 코팅 웻 클로스, S135

View in English

출처

관련 제품

ProStaff의 다른 제품

같은 카테고리(Rinseless&Waterless) 제품

더 보기