Z60 F
니하치 · 니하치프로 · nihachi · Nihachi Pro Z60 F · 28pro Z60 F · Z60"F" · Z60 F Anti-Static Glass Sealant · 니하치 프로 Z60 F · Z60 F 100ml · 帯電防止ガラス撥水剤 Z60 F · Z60 F 유리 발수 코팅 · Z60 에프 · 대전 방지 유리 발수제 Z60F · NihachiPro Z60 F · Z60 F 300ml · Nihachi Pro Z60 F 300ml · 28pro Z60 F 300ml · Z60"F" 300ml · Z60 F Anti-Static Glass Sealant 300ml · 니하치 프로 Z60 F 300ml · 帯電防止ガラス撥水剤 Z60 F 300ml · Z60 F 유리 발수 코팅 300ml · Z60 에프 300ml · 대전 방지 유리 발수제 Z60F 300ml · Z60 F Bulk · NihachiPro Z60 F 300ml
Z60 F 300ml은 니하치 프로 대전 방지 유리 발수 코팅제의 300ml 대용량 타입입니다. 특유의 대전 방지 성분이 주행 중 발생하는 정전기를 방출하여 우천·맑은 날 모두 주행 안정성을 향상시킵니다. 발수 지속 기간은 약 3개월입니다.
- 브랜드
- Nihachi Pro
- 카테고리
- Exterior : Glass Sealant
핵심 특징
- 대전 방지 유리 발수 코팅 — 300ml 대용량 타입
- 우천 시 및 맑은 날 주행 모두 효과 발휘
- 발수 지속 기간 약 3개월
- 초기 정착 1시간, 2회차부터는 재전처리 없이 덧바름 가능
- 접은 티슈 또는 키친 타월에 원액을 도포하여 사용
- 자동차 유리면 전용
사용법
- 유리면을 완전히 세정하여 물자국, 유막, 철분, 이물질을 제거한 후 물기를 닦아냅니다.
- 유리면 이외에 제품이 묻지 않도록 마스킹 처리합니다.
- 여러 겹으로 접은 티슈 또는 키친 타월에 원액을 고르게 묻힌 후 유리면에 종횡 방향으로 펴 바릅니다.
- 그늘에서 30~60분간 건조·정착시킵니다.
- 깨끗한 건조 클로스로 얼룩을 닦아냅니다.
- 시공 후 최소 1시간은 물에 닿지 않도록 하고, 물을 뿌려 발수 상태를 확인합니다.
Z60 F 300ml is the larger-volume variant of Nihachi Pro's anti-static glass water-repellent sealant for automotive windshields and windows. The proprietary anti-static agent helps discharge driving-induced static electricity for improved aerodynamic stability in all weather conditions. Water-repellency lasts approximately 3 months.
Key features
- Anti-static glass water-repellent coating — 300ml large-volume bottle
- Effective in both rainy and dry driving conditions
- Water-repellency lasts approximately 3 months
- Initial bond: 1 hour; can be relayered without full re-prep after first application
- Apply neat to folded tissue or kitchen paper — no dilution needed
- For automotive glass surfaces only
Usage
- Clean the glass surface thoroughly — remove water spots, oil film, iron particles, and other deposits, then wipe dry.
- Mask off any areas surrounding the glass where the product should not contact.
- Apply the liquid evenly onto several layers of folded tissue or kitchen paper, then spread it across the glass in vertical and horizontal strokes.
- Allow to dry and bond in shade for 30–60 minutes.
- Wipe off any unevenness with a clean dry cloth.
- Keep the surface dry for at least 1 hour after application; confirm water-repellency with a mist of water.