CTR 샴푸
CTR Shampoo
니하치 · 니하치프로 · nihachi · Nihachi Pro CTR Shampoo · 28pro CTR Shampoo · Acid CTR Shampoo · 酸性CTRシャンプー · 니하치 프로 CTR 샴푸 · 산성 CTR 샴푸 · CTR Shampoo 500ml · 28pro 산성 샴푸 · 산성 세차 샴푸 CTR · NihachiPro CTR Shampoo · CTR Shampoo Refill · Nihachi Pro CTR Shampoo Refill · 28pro CTR Shampoo Refill · Acid CTR Shampoo Refill · 酸性CTRシャンプー 詰め替え · CTR 샴푸 리필 · 니하치 프로 CTR 샴푸 리필 · 산성 CTR 샴푸 리필 · CTR Shampoo Refill Bottle · 28pro 산성 샴푸 리필 · CTR 샴푸 보충병 · NihachiPro CTR Shampoo Refill · CTR Shampoo 4L · Nihachi Pro CTR Shampoo 4L · 28pro CTR Shampoo 4L · Acid CTR Shampoo 4L · 酸性CTRシャンプー 4L · CTR 샴푸 4L · 니하치 프로 CTR 샴푸 4L · 산성 CTR 샴푸 4L · CTR Shampoo Bulk · 28pro 산성 샴푸 4L · CTR 샴푸 대용량 · NihachiPro CTR Shampoo 4L
CTR 샴푸는 산성 포뮬러의 자동차 세차 샴푸로, 도장면에 부착된 초기 단계의 물자국과 원형 물자국을 세차와 동시에 제거합니다. 정기 세차 시에는 원액 그대로, 일상적인 세차에는 정제수로 1:1 희석하여 사용합니다. 코팅 전 전처리 샴푸로도 활용 가능합니다.
- 브랜드
- Nihachi Pro
- 카테고리
- Exterior : Bucket Car Shampoo
- 기본 희석 비율
- RTU ~ 1:1
- pH
- acid
핵심 특징
- 산성 포뮬러로 세차와 동시에 초기 물자국 제거
- 코팅면에 사용하면 코팅층이 정돈된 것처럼 광택이 향상됨
- 정기 세차 시 원액 사용, 일상 세차 시 1:1 희석 사용
- 코팅 전 전처리 샴푸로 활용 가능
- 알칼리 제품과 절대 혼합 금지, 보호 장갑 착용 필수
- 도금 휠 및 알루마이트 처리 면에는 사용 불가
희석 비율
- Exterior : Bucket Car Shampoo — RTU ~ 1:1 (1:0-1) (기본)
사용법
- 차체를 물로 충분히 헹굽니다.
- 보호 장갑, 마스크, 보안경을 착용한 후 차체가 젖은 상태에서 스펀지에 CTR 샴푸를 5회 정도 뿌립니다.
- 패널 하나씩 부드럽게 펴 바른 후 즉시 물을 끼얹어 잔류액을 완전히 씻어냅니다.
- 다음 패널로 이동하며 1~2회 추가 도포 후 헹구기를 반복하여 차량 전체를 세차합니다.
- 마지막으로 전체에 물을 충분히 끼얹어 잔류액이 남지 않도록 합니다.
- 물기를 닦아낸 후 코팅제로 마무리 보호 처리를 합니다.
CTR Shampoo is an acid-formula car shampoo that simultaneously washes and removes early-stage water spots and circular stains from painted surfaces. It can be used at full strength for deep maintenance washes or diluted 1:1 with purified water for everyday cleaning. It is also effective as a pre-coating prep shampoo.
Key features
- Acid-formula shampoo removes early water spots while washing
- Boosts coating gloss by tightening the coating layer after each wash
- Use undiluted for heavy maintenance; dilute 1:1 with purified water for regular washes
- Suitable as a pre-coating prep shampoo
- Do not mix with alkaline products; wear protective gloves
- Not for use on chrome-plated or anodized wheel surfaces
Usage
- Rinse the vehicle with water.
- Put on protective gloves, mask, and eye protection. With the body still wet, apply CTR Shampoo to a sponge — about 5 pumps for the first panel.
- Work one panel at a time — gently spread across the surface, then immediately rinse with water to fully remove residue.
- Move to the next panel, applying 1–2 pumps, and rinse. Repeat until the whole vehicle is washed.
- Do a final thorough rinse of the entire vehicle to ensure all residue is removed.
- Dry the surface and apply a coating for protection.