리무버 XX HIGH
Remover XX HIGH
Nihachi Pro · 니하치 · 니하치프로 · nihachi · Nihachi Pro Remover XX HIGH · 28pro Remover XX HIGH · Remover Double-X High · XX HIGH Acid Scale Remover · リムーバーXX HIGH · 니하치 프로 리무버 XX HIGH · 28프로 리무버 XX HIGH · 리무버 더블엑스 하이 · 산성 스케일 제거제 HIGH · NihachiPro Remover XX HIGH
연마 없이 이온 디포짓, 물자국, 스케일, 흑화 오염, 철분을 화학적으로 분해·제거하는 초강력 산성 스케일 제거제입니다. 강력한 성능으로 인해 노후 코팅 피막까지 박리할 수 있으므로 사용 전 충분한 주의가 필요합니다.
- 브랜드
- 니하치 프로
- 카테고리
- Exterior : Remover
- 기본 희석 비율
- RTU
- pH
- acid
핵심 특징
- 심각한 이온 디포짓·스케일에 대응하는 초강력 산성 포뮬러
- 철분, 흑화 오염, 코팅 노폐물 제거
- 연마 불필요 — 오염물을 화학적으로 분해
- 경화형 코팅 피막 박리 가능성 있음; 연마 전 전처리로 활용
- 전문가 전용; 시공 전 반드시 눈에 띄지 않는 부위에서 테스트
희석 비율
- Exterior : Remover — RTU (1:0) (기본)
사용법
- 세차 후 물기를 완전히 닦아냅니다.
- 스펀지 또는 마이크로파이버 클로스에 소량을 묻혀 이온 디포짓·스케일 부위에 고르게 펴 바릅니다.
- 시간을 두지 않고 같은 클로스로 스크래치가 나지 않도록 가볍게 문질러 닦습니다.
- 즉시 깨끗한 천을 물에 적셔 짜낸 후 시공 부위를 닦고, 패널 단위로 이동해 동일하게 반복합니다. 절대 건조시키지 마십시오.
- 깨끗한 물로 충분히 헹군 뒤 물기를 닦습니다. 알칼리성 탈지 세정제로 잔류 산을 완전히 중화하십시오.
- 노출된 도장면 보호를 위해 코팅제를 시공합니다.
- 반드시 보호 장갑·고글·마스크를 착용합니다. 스프레이 분무 금지, 다른 약품과 혼합 금지. 접합 유리·크롬 휠·무도장 알루미늄·아노다이징 파츠에는 사용 불가.
An ultra-strong professional acidic scale remover that chemically dissolves ion deposits, water spots, mineral scale, dark staining, and iron fallout without abrasion. Its high potency can also strip aged coating films, making thorough surface preparation critical before use.
Key features
- Ultra-strong acid formula for heavy ion deposit and scale removal
- Removes iron fallout, dark staining, and coating byproduct buildup
- No abrasion required — breaks down contaminants chemically
- Can strip hardened coating films; use with caution as a pre-polish prep step
- For professional use only; always test on a hidden area first
Usage
- Wash the vehicle and wipe off all moisture before starting.
- Apply a small amount to a sponge or microfiber cloth and spread it over the ion-deposit or scale-affected area.
- Without delay, gently wipe the treated surface with the same cloth, taking care not to scratch the paint.
- Immediately wipe off with a clean, water-dampened cloth; proceed panel by panel. Never let the product dry on the surface.
- Rinse thoroughly with clean water and wipe dry. Use an alkaline degreasing wash to fully neutralize residual acid.
- Apply a protective coating to protect the exposed paintwork.
- Always wear protective gloves, goggles, and a mask. Do not spray or atomize; never mix with other chemicals. Avoid on laminated glass, chrome wheels, bare aluminum, or anodized parts.