NANOSKIN 퍼스트 컷 희석비 & 사용 가이드

NANOSKIN 퍼스트 컷 희석비 pH 스펙 카드

FIRST CUT

나노스킨 퍼스트 컷은 모든 자동차 도장에서 샌딩 자국, 산화 및 페인트 결함을 제거하기 위한 1단계 폴리싱 컴파운드입니다. 감소형 연마재, 미세 연마 분말, 화학 세정제의 조합으로 저분진 마무리를 구현하며, 실리콘·왁스·필러를 포함하지 않습니다.

브랜드
NANOSKIN
카테고리
Exterior : Polishes
기본 희석 비율
RTU
pH
neutral (7)
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 잘 흔든 후, 직사광선을 피하고 차갑고 깨끗한 도장면에만 사용합니다.
  2. 핸드 도포: 부드러운 천에 소량을 묻혀 스크래치가 제거될 때까지 문지른 후 잔여물을 닦아냅니다.
  3. 로터리 폴리셔: 표면에 소량을 도포하고 울 또는 폼 패드로 저속에서 버핑하며, 패드를 살짝 기울여 좌우로 움직여 스크래치를 제거합니다. 잔여물을 닦아냅니다.
  4. DA 또는 오비탈 폴리셔: 표면에 소량을 도포하고 소용돌이 흠집이 제거될 때까지 폴리싱한 후 잔여물을 닦아냅니다.

NANOSKIN FIRST CUT is a first-step polishing compound designed to remove sanding marks, oxidation, and paint defects from all automotive paint types. A blend of diminishing abrasives, fine polishing powders, and chemical cleaning agents delivers a low-dust finish. The product contains no silicone, wax, or fillers, and is intended to be followed by COMPOLISH for a complete paint correction.

Key features

  • Removes sanding marks, oxidation, and paint defects
  • Suitable for all automotive paint types
  • Diminishing abrasive formula for low-dust application
  • Silicone-, wax-, and filler-free
  • First step in two-stage paint correction with COMPOLISH

Usage

  1. Shake well and apply only to clean, cool paint out of direct sunlight.
  2. Hand: Apply a small amount to a soft cloth and rub on the surface until scratches are removed, then wipe off residue.
  3. Rotary polisher: Apply a small amount to the surface and buff with a wool or foam pad at low RPM, slightly tilting the pad side to side to remove scratches. Wipe off residue.
  4. DA or orbital polisher: Apply a small amount to the surface and polish until swirls are removed, then wipe off residue.

다른 이름: 나노스킨, NANOSKIN FIRST CUT, NS FIRST CUT, FC, NANOSKIN FC, NS FC, 나노스킨 퍼스트 컷

View in English

출처

관련 제품

NANOSKIN의 다른 제품

같은 카테고리(Polishes) 제품

더 보기