브이30
V30
V30은 마지막 폴리싱 단계용 피니싱 폴리시로, 광택을 끌어올리고 이전 단계에서 남은 극미세 스월 마크와 흔적을 제거할 때 사용합니다. 포뮬라는 아시아 및 소프트 클리어 코트를 대상으로 하며, 윤활 성분이 분진을 줄이면서 장시간 작업을 돕습니다.
- 브랜드
- Vonixx
- 카테고리
- Exterior : Polishes
- 기본 희석 비율
- RTU
핵심 특징
- 마지막 단계용 피니싱 폴리시
- 광택 향상 및 극미세 스월 마크 제거
- 아시아 및 소프트 클리어 코트용
- 낮은 분진 발생
- 장시간 작업을 돕는 윤활 성분
희석 비율
- Exterior : Polishes — RTU (1:0) (기본)
사용법
- 사용 전 제품을 충분히 흔들어 줍니다.
- 표면이 깨끗하고 시원한 상태인지 확인합니다.
- 패드 또는 도장면에 제품을 몇 방울 떨어뜨립니다.
- 작업 면적에 제품을 펴 발라 튀김을 방지합니다.
- 피니싱 패드를 장착한 로터리 폴리셔(800~1200 rpm) 또는 듀얼액션 폴리셔(2000~4000 OPM)를 사용합니다.
- 70×70cm 구역을 약한 압력으로 폴리싱합니다.
- 극세사 타월로 잔여물을 닦아내고 필요하면 반복합니다.
V30 is a finishing polish for the last polishing step, used to lift gloss and remove very fine swirls and traces left by earlier stages. The formula targets Asian and soft clear coats, with built-in lubricants that support longer work time and low dust generation.
Key features
- Finishing polish for the last polishing step
- Raises gloss and removes very fine swirls
- Targets Asian and soft clear coats
- Low dust generation
- Lubricants for extended work time
Usage
- Shake the product well before use.
- Confirm the surface is clean and cool to the touch.
- Apply a few drops of product to the pad or paint surface.
- Spread the product across the work area to avoid splatter.
- Use a rotary polisher (800–1200 rpm) with a finishing pad, or a dual-action polisher (2000–4000 OPM).
- Polish a 70×70 cm section with light pressure.
- Wipe residue away with a microfiber towel and repeat if needed.
다른 이름: 보닉스, Vonix, Vonixx V30, 보닉스 브이30
View in English