Nanolex 나노렉스 SiSplash 희석비 & 사용 가이드

Nanolex 나노렉스 SiSplash 희석비 pH 스펙 카드

Nanolex SiSplash

세차 직후 몇 분 만에 광택과 물 비드 효과를 더해 주는 빠른 발수 스프레이 실란트입니다. 젖은 패널에 직접 분사하거나 마이크로파이버 타월에 분사해 도포할 수 있고, 색감을 살리면서 가벼운 오염으로부터 도장을 보호합니다. 표시 지속성은 약 3,000km 또는 3회 세차 수준으로, 장기 세라믹 실란트의 보조용으로 활용할 수 있습니다.

브랜드
Nanolex
카테고리
Exterior : Glass Sealant, Exterior : Coating, Exterior : Quick Detailer
기본 희석 비율
RTU
최종 업데이트
2026-06-26

핵심 특징

희석 비율

용도희석비율
Exterior : Glass Sealant (기본)RTU1:0

사용법

  1. 작업 전 차량 표면이 깨끗한지 확인합니다.
  2. 습식: 젖은 패널에 SiSplash를 분사하고 마르지 않도록 약 1분간 둔 뒤 부드러운 물줄기로 충분히 헹구고, 울트라 드라잉 타올로 압력 없이 닦아 건조합니다.
  3. 건식: 패널당 1~2회 마이크로파이버 타월에 분사하여 고르게 펴 바른 뒤 깨끗한 마이크로파이버 타월로 닦아 얼룩 없는 마감을 만듭니다.
  4. 도포 후 바로 차량을 사용할 수 있습니다.

A fast hydrophobic spray sealant that adds gloss and water beading to exterior surfaces in minutes. Can be sprayed onto a wet panel after washing or onto a microfiber towel for a dry application, intensifying color while shielding against light contaminants. Stated protection lasts up to roughly 3,000 km or about 3 washes, useful as a top-up between longer-term ceramic sealants.

Key features

  • Quick gloss boost in minutes
  • Hydrophobic water and dirt beading
  • Spray-on application, wet or dry
  • Useful between long-term sealants
  • Stated protection up to about 3,000 km or 3 washes

Usage

  1. Make sure the vehicle surface is clean before starting.
  2. Wet method: spray SiSplash onto wet panels, wait about a minute without letting it dry, rinse thoroughly with a gentle stream, then dry with the Ultra Drying Towel without pressure.
  3. Dry method: spray 1 to 2 shots per panel onto a microfiber towel, spread evenly, then buff with a clean microfiber towel for a streak-free finish.
  4. The vehicle can be used immediately after application.

다른 이름: 나노렉스, SiSplash, Si Splash, Nanolex Si Splash, 시스플래시, 나노렉스 시스플래시, Si Splash quick sealant, SiSplash Quick Sealant, Si-Splash

View in English

출처

관련 제품

Nanolex의 다른 제품

같은 카테고리(Glass Sealant) 제품

더 보기