Nanolex EX SOL 희석비 & 사용 가이드

Nanolex EX SOL 희석비 pH 스펙 카드

도장, 유리, 플라스틱에 남은 오일, 왁스, 폴리시 잔여물을 제거하는 무수 솔벤트 기반 클리너 겸 탈지제입니다. 깨끗하고 건조한 표면을 남겨 실란트나 세라믹 코팅 도포 전에 사용하기 적합합니다. 코팅 전 탈지 작업을 위해 독일에서 만들어집니다.

브랜드
Nanolex
카테고리
Exterior : Remover
기본 희석 비율
RTU
최종 업데이트
2026-06-26

핵심 특징

희석 비율

용도희석비율
Exterior : Remover (기본)RTU1:0

사용법

  1. 표면 또는 마이크로화이버 천에 EX SOL을 직접 분사합니다.
  2. 패널을 닦아 오일, 왁스, 폴리시 잔여물을 제거합니다.
  3. 별도 헹굼 없이 솔벤트가 자연 증발되도록 둡니다.
  4. 표면을 확인해 잔여물이 남은 부위는 다시 처리합니다.
  5. 패널이 완전히 건조된 뒤 실란트 또는 코팅을 도포합니다.

A water-free, solvent-based cleaner and degreaser that removes oil, wax, and polish residue from paint, glass, and plastic. It leaves a clean, dry surface ready for sealants or ceramic coatings. Made in Germany for pre-coating prep work.

Key features

  • Water-free solvent formula targets stubborn residue
  • Designed for prep before sealant or coating
  • Leaves a clean, dry surface for good adhesion
  • Usable on paint, glass, and plastic
  • Simple to apply by spray or cloth
  • Developed and produced in Germany

Usage

  1. Spray EX SOL directly onto the surface or onto a microfiber cloth.
  2. Wipe the panel to remove oil, wax, and polish residue.
  3. Let the solvent flash off; no rinsing needed.
  4. Inspect the surface and re-treat any areas with leftover residue.
  5. Apply your sealant or coating once the panel is fully dry.

다른 이름: 나노렉스, Nanolex EX SOL, EX-SOL, Nanolex EX-SOL, EXSOL, Nanolex Intensive Paint Cleaner, Paint Prep Solvent, 나노렉스 EX SOL, EX 솔, 이엑스 솔, 솔벤트 페인트 클리너

View in English

관련 제품

Nanolex의 다른 제품

같은 카테고리(Remover) 제품

더 보기