Nanolex 클레이 루브 희석비 & 사용 가이드

Nanolex 클레이 루브 희석비 pH 스펙 카드

Clay Lube

클레이바 작업용으로 만든 순한 실리콘 프리 윤활제입니다. 클레이와 도장면 사이의 마찰을 줄여 스크래치 위험을 낮추고, 기름진 막을 남기지 않으며 클레이 수명을 늘려줍니다. 도장, 유리, 플라스틱에 안전하며 독일에서 생산됩니다.

브랜드
Nanolex
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 클레이 작업 전 차량을 충분히 세차해 굵은 오염을 제거합니다.
  2. 클레이할 패널에 루브를 넉넉히 분사합니다.
  3. 클레이 바에도 가볍게 분사해 미끄러짐을 더합니다.
  4. 가벼운 압력으로 직선 방향으로 클레이를 움직입니다.
  5. 마찰이 커지면 패널에 루브를 다시 분사합니다.
  6. 섹션마다 깨끗한 마이크로화이버 타월로 닦아냅니다.

A mild, silicone-free lubricant made to be used with clay bars during decontamination. It reduces friction between clay and paint to help limit marring, leaves no oily film, and helps extend the working life of the clay. Safe on paint, glass, and plastic; made in Germany.

Key features

  • Silicone-free, compatible with later sealants
  • Low residue, wipes off cleanly
  • Helps reduce marring during claying
  • Helps extend usable life of the clay bar
  • Made in Germany
  • Safe on common vehicle surfaces

Usage

  1. Wash the vehicle thoroughly to remove coarse dirt before claying.
  2. Spray the lubricant generously onto the panel to be clayed.
  3. Spray a light coat onto the clay bar itself for added glide.
  4. Work the clay across the panel in straight passes with light pressure.
  5. Re-mist the panel whenever drag increases.
  6. Wipe the panel with a clean microfiber towel after each section.

다른 이름: 나노렉스, Nanolex Clay Lube, Clay Lubricant, Clay-Lube, Silicone-Free Clay Lubricant, 나노렉스 클레이 루브, 클레이바 윤활제, 클레이 윤활제, 실리콘 프리 클레이 루브

View in English

관련 제품

Nanolex의 다른 제품

같은 카테고리(Polishes) 제품

더 보기