나노렉스 Si3D 세라바이드
Nanolex Si3D Cerabide
나노렉스 · Si3D Cerabide · Si3D CERABIDE · Nanolex Cerabide · Cerabide · Si3D Carbide · 나노렉스 세라바이드 · Si3D 세라바이드 · 세라바이드 · 세라믹 코팅 · Si3D Cerabide Coating · Nanolex Si3D Cerabide 30ml · 3D SiCarbid
도장, 휠, 단단한 플라스틱 부품에 사용할 수 있는 사실상 무 VOC 단일층 세라믹 코팅으로, 기능화된 하이브리드 고체 입자로 강화된 3D Si 카바이드 매트릭스 위에 설계되었습니다. 약 105° 수준의 접촉각으로 강한 발수성을 보여주며, 높은 스크래치 저항성과 비가역적 스크래치 채움 특성을 함께 제공합니다. 까다로운 환경에서도 약 75,000km 이상의 수명이 안내되며, 번들은 코팅 30ml, 어플리케이터 블록, 스웨이드 천 4장, 마이크로파이버 버핑 타월로 구성됩니다.
- 브랜드
- Nanolex
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- RTU
핵심 특징
- 도장, 휠, 단단한 플라스틱을 위한 단일층 세라믹 코팅
- 사실상 무 VOC 포뮬러
- 약 105° 접촉각 수준의 강한 발수성
- 높은 스크래치 저항성과 비가역적 스크래치 채움 특성
- 까다로운 환경에서도 약 75,000km 이상의 수명
- 약 15분부터 시작되는 건조 시간
- 두꺼운 막 두께로 도장 색상 깊이를 더함
- 번들 구성: Si3D 세라바이드 30ml, 어플리케이터 블록, 스웨이드 천 4장, 마이크로파이버 버핑 타월
희석 비율
- Exterior : Coating — RTU (1:0) (기본)
사용법
- 나노렉스 EX 또는 프리워시로 표면의 먼지, 유분, 오염을 정리합니다.
- 도포 전에 표면이 완전히 건조되었는지 확인합니다.
- 스크래치가 많거나 산화가 진행된 도장은 나노렉스 헤비컷 또는 피니싱 폴리시로 먼저 폴리싱합니다.
- +5°C에서 +30°C 사이의 작업 온도, 직사광선이 없는 환경에서 도포합니다.
- 병을 잘 흔든 뒤 보풀 없는 어플리케이터에 몇 방울 떨어뜨려 원형 동작으로 고르게 펴 바릅니다.
- 코팅이 마르기 시작할 때까지 약 10~15분 정도 둡니다.
- 깨끗하고 부드러운 마이크로파이버 타월로 잔여물을 정리하며 광택을 살립니다.
- 물에 닿기 전 최소 4시간 동안 표면을 건조한 상태로 유지하고, 약 24시간이 지난 뒤 완전 경화에 도달합니다.
- 경화 중에는 차량 세차나 물 접촉을 피하고, 이후에는 나노렉스 퓨어 샴푸 등 순한 샴푸로 관리합니다.
A virtually VOC-free single-layer ceramic coating for paint, rims and hard plastic parts, built on a 3D Si carbide matrix reinforced with functionalised hybrid solid particles. It offers strong hydrophobicity (around a 105° contact angle), high scratch resistance and irreversible scratch-filling behaviour. Quoted service life is above 75,000 km even under demanding conditions, and the bundle includes 30 ml of coating, an applicator block, four suede cloths and a microfiber buffing cloth.
Key features
- Single-layer ceramic coating for paint, rims and hard plastics
- Virtually VOC-free formula
- Strong hydrophobicity with around a 105° contact angle
- High scratch resistance and irreversible scratch filling
- Service life above 75,000 km in demanding conditions
- Drying time from around 15 minutes
- Adds depth to paint color through high film thickness
- Bundle: Si3D Cerabide (30 ml), applicator block, four suede cloths, microfiber buffing cloth
Usage
- Decontaminate the surface using Nanolex EX or Nanolex PreWash to remove dirt, grease and oils.
- Make sure the surface is completely dry before application.
- If the paint is heavily scratched or oxidized, polish first with Nanolex Heavy Cut Polish or Finishing Polish.
- Apply at a working temperature between +5°C and +30°C, away from direct sunlight.
- Shake the bottle and place a few drops on a lint-free applicator, spreading evenly in circular motions.
- Allow around 10 to 15 minutes for the coating to start drying.
- Buff with a clean, soft microfiber cloth to remove excess and reveal the gloss.
- Keep the surface dry for at least 4 hours before exposure to moisture; full cure is reached after about 24 hours.
- Avoid washing or wetting the vehicle during cure and maintain afterwards with mild shampoos such as Nanolex Pure Shampoo.