Nanolex 나노렉스 Si3D RIM 희석비 & 사용 가이드

Nanolex 나노렉스 Si3D RIM 희석비 pH 스펙 카드

Nanolex Si3D RIM

휠 림 전용으로 개발된 폴리실라잔 기반 세라믹 코팅으로, 브레이크 열과 브레이크 분진에 대한 내구성과 유연성의 균형을 맞춥니다. 클리어코트 및 무도장 림 모두에 사용할 수 있고, 손작업이나 HVLP/에어브러시 분사 방식 모두 가능합니다. 경화 후에는 브레이크 분진과 오염이 더 쉽게 씻겨 나가도록 도와주는 발수 막을 형성하며, 상온에서 약 24시간 경화하면 약 50,000km 또는 50회 세차(약 2년) 정도의 보호 기간이 안내됩니다.

브랜드
Nanolex
카테고리
Exterior : Tire&Wheel Sealant
기본 희석 비율
RTU
최종 업데이트
2026-06-26

핵심 특징

희석 비율

용도희석비율
Exterior : Tire&Wheel Sealant (기본)RTU1:0

사용법

  1. 온도 5~30°C, 습도 30~70% 환경의 직사광선이 없는 그늘에서 작업합니다.
  2. 휠을 완전히 건조시키고 오염을 제거하며, Nanolex PreWash Concentrate로 세정한 뒤 도포 직전 Nanolex EX로 마무리 탈지합니다.
  3. 수작업 도포: Si3D Rim 8~10방울을 마이크로파이버 어플리케이터에 떨어뜨려 크로스 패턴으로 휠 표면에 과한 힘 없이 고르게 펴 바릅니다.
  4. 수작업 마무리: 약 2~3분 후 부드러운 마이크로파이버 타월로 가볍게 잔여물을 닦아냅니다.
  5. 스프레이 도포: HVLP의 경우 압력 약 2~3 bar, 노즐 0.5mm로 설정해 Si3D Rim을 휠 표면에 균일하게 분사하며 분사 후 닦아내지 않습니다.
  6. 환기가 잘되는 환경에서 상온으로 최소 24시간 경화하고, 경화 중에는 물 접촉을 피하며 도포 후 7일간은 휠을 세차하지 않습니다.

A polysilazane-based ceramic coating engineered for wheel rims, balancing flexibility with resistance to brake heat and brake dust. It bonds to clear-coated and uncoated rims, can be applied by hand or sprayed via HVLP or airbrush, and once cured leaves a hydrophobic layer that helps brake dust and dirt rinse off more easily. Cures at room temperature in about 24 hours, with a quoted protection window of roughly 50,000 km or 50 washes (around 2 years).

Key features

  • Polysilazane-based formula tuned for daily wheel exposure
  • Apply by hand or via spray equipment such as HVLP or airbrush
  • Quoted protection of around 50,000 km or 50 washes
  • Withstands the heat from spinning and braking
  • Helps brake dust and dirt wash off more easily

Usage

  1. Work between 5 and 30°C with 30 to 70% humidity, in shade away from direct sunlight.
  2. Make sure the rims are dry and free of contamination, using Nanolex PreWash Concentrate followed by Nanolex EX just before application.
  3. Manual application: place 8 to 10 drops of Si3D Rim onto a microfiber applicator and spread evenly over the rim in crisscross motions without excessive pressure.
  4. Manual buffing: after about 2 to 3 minutes, wipe off the residue with a soft microfiber cloth using light motions.
  5. Spray application: with HVLP set pressure around 2 to 3 bar and use a 0.5 mm nozzle, spraying Si3D Rim evenly across the rim with no wiping afterwards.
  6. Cure at room temperature for at least 24 hours in a well-ventilated area, avoiding water contact during cure and not washing the rims for the first 7 days.

다른 이름: 나노렉스, Si3D RIM, Si3D Rim, Nanolex Si3D Rim, 나노렉스 Si3D 림, Si3D 림, Si3D Wheel Coating, Si3D Rim Coating, Nanolex Si3D Wheel Ceramic

View in English

출처

관련 제품

Nanolex의 다른 제품

같은 카테고리(Tire&Wheel Sealant) 제품

더 보기