McKee's 37 코팅 프렙 폴리시 희석비 & 사용 가이드

McKee's 37 코팅 프렙 폴리시 희석비 pH 스펙 카드

Coating Prep Polish

실리콘, 왁스, 폴리머, 필러를 포함하지 않은 비연마성 케미컬 폴리시로, 세라믹 코팅 전 도장 준비 전용으로 설계되었습니다. 코팅 결합을 방해하는 도장 표면 아래 오염물을 분해하면서 잔여물을 남기지 않아 IPA나 솔벤트 와이프 단계를 생략할 수 있습니다. 라이트 컬러는 더 밝게, 다크 컬러는 더 깊이감 있게 마무리됩니다.

브랜드
McKee's 37
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 표면이 차갑고 직사광선이 닿지 않는 상태에서 작업을 시작합니다.
  2. 핸드 도포: 테리 또는 폼 패드에 10원 동전 크기로 짜서 표면에 골고루 문질러줍니다.
  3. 머신 도포: 폴리셔를 중간 속도로 맞추고 폼 폴리싱 패드에 50원 동전 크기로 짠 뒤 표면에 작업합니다.
  4. 깨끗한 마이크로파이버 타월로 잔여물을 닦은 뒤 코팅·왁스·실란트를 도포합니다.

Non-abrasive chemical polish made without silicones, waxes, polymers or fillers, intended specifically to prep paint for ceramic coatings. Deep cleans below-surface contaminants that hinder coating adhesion and leaves no residue, so an IPA or solvent panel wipe is not required. Brightens light colors and deepens dark colors as it preps the surface.

Key features

  • Non-abrasive chemical polish
  • No silicones, waxes, polymers or fillers
  • Eliminates the need for IPA or solvent panel wipe
  • Compatible with all paint coatings
  • Hand or machine application

Usage

  1. Make sure the surface is cool to the touch and out of direct sunlight.
  2. Hand: apply a dime-sized amount to a terry cloth or foam pad and work it into the surface.
  3. Machine: set the polisher to medium speed, apply a nickel-sized amount to a foam polishing pad, and work into the surface.
  4. Remove residue with a clean microfiber towel before applying a coating, wax or sealant.

다른 이름: 맥키스, 37, McKee's 37 Coating Prep Polish, MK37 Coating Prep Polish, Coating Polish, CPP, 맥키스 37 코팅 프렙 폴리시, 맥키스 37 CPP

View in English

출처

관련 제품

McKee's 37의 다른 제품

같은 카테고리(Polishes) 제품

더 보기