McKee's 37 비스트 컴파운드 희석비 & 사용 가이드

McKee's 37 비스트 컴파운드 희석비 pH 스펙 카드

BEAST Compound

1000방 이상의 샌딩 마크, 깊은 스월, 워터스팟, 스크래치를 도장을 헤이즈시키지 않으면서 한 번에 제거하도록 설계된 헤비 컷 컴파운드입니다. 바디샵 세이프, 저분진, 저자극 향에 클리어 코트와 싱글 스테이지 모두에 안전하다고 안내됩니다.

브랜드
McKee's 37
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 잘 흔들고 뜨거운 표면에는 사용하지 마십시오.
  2. 원하는 컷 레벨에 따라 울, 폼, 마이크로파이버 패드 중 선택합니다.
  3. 패드에 10원 동전 크기로 3방울을 떨어뜨립니다.
  4. 좁은 면적씩 작업하며 컴파운드가 헤이즈된 뒤 투명해질 때까지 5~6회 오버랩 패스로 진행합니다.
  5. 깨끗한 마이크로파이버 타월로 잔여물을 닦아낸 뒤 피니싱 폴리시로 마무리합니다.

Heavy-cut compound built to erase 1000-grit or finer sanding marks, deep swirl marks, water spots and scratches without scouring or hazing the finish. Listed as body-shop safe, low-dust and low-odor, and safe on clear coat and single-stage paint systems.

Key features

  • Removes 1000-grit or finer sanding marks
  • Erases swirl marks, water spots and scratches
  • Low-dust, low-smear working feel
  • Safe on clear coat and single-stage paint
  • Body-shop safe and VOC compliant

Usage

  1. Shake well and do not apply to a hot surface.
  2. Choose a wool, foam or microfiber pad based on the cut you need.
  3. Apply three dime-sized dollops directly onto the pad.
  4. Working a small section at a time, perform 5-6 overlapping passes until the compound hazes and turns clear.
  5. Buff off the residue with a clean microfiber towel and follow with a finishing polish.

다른 이름: 맥키스, 37, McKee's 37 BEAST Compound, MK37 BEAST Compound, Mckees 37 Beast Compound, 맥키스 37 비스트 컴파운드, 맥키스37 비스트 컴파운드

View in English

출처

관련 제품

McKee's 37의 다른 제품

같은 카테고리(Polishes) 제품

더 보기