CarPro 울트라컷 희석비 & 사용 가이드

CarPro 울트라컷 희석비 pH 스펙 카드

UltraCut

완전 소멸 연마재로 강력한 페인트 결함 제거력을 발휘하는 헤비 커팅 컴파운드입니다. 적은 분진과 넉넉한 작업 시간을 제공하며, 향상된 윤활 시스템으로 로터리와 DA 폴리셔 모두에서 헤이즈와 마킹을 최소화합니다.

브랜드
CarPro
카테고리
Exterior : Polishes
기본 희석 비율
RTU
pH
alkali (8.5)
구매(한국)
쿠팡에서 보기 — 쿠팡 파트너스 활동의 일환으로 일정 수수료를 제공받을 수 있습니다
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 깨끗하고 건조한 패드에 컴파운드를 얇게 문질러 프라이밍한 뒤 울트라컷을 완두콩 크기로 3~4방울 추가합니다.
  2. 폴리셔를 작동하기 전 작업 구간에 제품을 고르게 폅니다.
  3. 머신 속도를 고속(약 4~5단계)으로 올립니다.
  4. 처음 2~3번 패스는 최소 압력으로 시작해 패스마다 압력을 점진적으로 높입니다.
  5. 패드에 자주 공기를 불어 컴파운드가 굳지 않도록 합니다.
  6. 스크래치가 사라지거나 컴파운드가 투명해지면 극세사 타월로 잔여물을 닦아 냅니다.

A heavy-cutting compound formulated with fully diminishing abrasives for strong paint defect removal with minimal dust generation and an extended working window. The enhanced lubricant system allows both rotary and dual-action use while leaving little residual haze or marring.

Key features

  • Fully diminishing abrasive system
  • Very low dusting
  • Extended working time
  • Minimal residual haze and marring
  • Enhanced lubricant system
  • Suitable for rotary and dual-action polishers

Usage

  1. Prime a clean, dry pad with a thin worked-in layer of compound, then add 3 to 4 pea-sized drops of UltraCut.
  2. Spread the product evenly across a working section before engaging the polisher.
  3. Increase machine speed to a high setting (around 4 to 5).
  4. Begin with minimal pressure for the first 2 to 3 passes, then increase progressively.
  5. Blow air onto the pad frequently to prevent buildup.
  6. Once scratches disappear or the compound clears, wipe residue with a microfiber towel.

다른 이름: 카프로, CARPRO UltraCut, UltraCut Compound, Extreme Cut Compound, 울트라컷 컴파운드

View in English

관련 제품

CarPro의 다른 제품

같은 카테고리(Polishes) 제품

더 보기