유니버설 클레이 루브리컨트
Universal Clay Lubricant
클레이 바와 도장 사이에 미끄러운 막을 만들어 잡힌 입자가 표면 위로 흐르도록 돕는 수성 클레이 루브리컨트입니다. 글로스 에이전트가 들어 있지 않아 클레이 작업 결과를 그대로 확인할 수 있으며, 합성 및 천연 클레이 모두에 사용할 수 있습니다. 클레이 후 잔여물 닦기와 디테일링 사이의 가벼운 와이프다운 용도로도 활용됩니다.
- 브랜드
- McKee's 37
- 카테고리
- Exterior : Polishes
- 기본 희석 비율
- RTU
핵심 특징
- 클레이 작업용 수성 윤활제
- 클레이 단계 중 스크래치 발생 억제
- 글로스 에이전트 무첨가, 작업 결과 그대로 확인
- 합성·천연 클레이 모두 호환
- 클레이 후 잔여물 제거 용도
희석 비율
- Exterior : Polishes — RTU (1:0) (기본)
사용법
- 세차를 마친 차량 도장면에 약 60cm x 60cm 구역으로 루브리컨트를 분사합니다.
- 젖은 구역에서 클레이 바를 부드럽게 왕복시키며 미끄럽게 움직일 때까지 작업합니다.
- 깨끗한 마이크로파이버 타월로 닦고, 잔여물은 루브리컨트를 더 분사해 제거합니다.
- 구역 사이에 클레이 상태를 확인하고 접어 깨끗한 면을 드러냅니다.
- 보관 시 클레이에 루브리컨트를 분사한 뒤 케이스에 밀봉합니다.
Water-based clay lubricant that forms a slick layer between the clay bar and paint so trapped contaminants glide above the surface instead of scratching it. Contains no gloss agents, so the true result of the clay step stays visible, and works with synthetic and natural clays. Doubles as a post-clay residue wiper and a light wipe-down between details.
Key features
- Water-based lubricant for clay barring
- Helps prevent scratching during clay step
- No gloss agents, so clay results stay visible
- Compatible with synthetic and natural clay
- Doubles as post-clay residue wiper
Usage
- On a freshly washed vehicle, mist a 2 ft x 2 ft area of paint with the lubricant.
- Gently glide the clay bar back and forth across the wet area until it slides freely.
- Wipe the section with a clean microfiber towel, using more lubricant to lift residue.
- Inspect the clay between sections and reshape it to expose a clean side.
- Before storing, moisten the clay with lubricant and seal it in its case.
다른 이름: 맥키스, 37, McKee's 37 Universal Clay Lubricant, MK37 Universal Clay Lubricant, Clay Lubricant, UCL, 맥키스 37 유니버설 클레이 루브리컨트, 맥키스 37 UCL
View in English