Labocosmetica TPR - 트림 플라스틱 리스토러 보호 코팅 희석비 & 사용 가이드

Labocosmetica TPR - 트림 플라스틱 리스토러 보호 코팅 희석비 pH 스펙 카드

TPR - Trim Plastic Restorer Protective Coating

TPR은 무도장 플라스틱, 비닐, 고무를 재생·보호하면서 색이 바랜 트림을 살려내고 UV 손상, 산화, 환경 오염을 차단합니다. 광택이나 색소, 인위적 효과를 더하지 않고 색감과 질감을 안정화하면서 점진적 산화를 늦추는 진정한 보호 코팅으로 작동합니다. 결과는 촉감이 건조한, 자연스러운 새틴 마감입니다.

브랜드
Labocosmetica
카테고리
Exterior : Coating, Exterior : PPF Maintenance
기본 희석 비율
RTU
구매(한국)
쿠팡에서 검색
최종 업데이트
2026-08-16

작용 방식

  • 실리콘 피막(광택·발수) — 광택과 발수를 주지만, 도장 작업 전에는 제거가 필요합니다.

공개 성분

성분CAS역할
Polydimethylsiloxane (dimethicone)63148-62-9피막 형성제
hanol67-56-1용제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 빛바랜 플라스틱을 고르게 살려 자연스러운 블랙 깊이감 회복
  • UV, 산성비, 스모그, 반복 세차로부터 보호 도움
  • 외관을 바꾸지 않고 점진적 산화 지연
  • 표면을 봉쇄해 새로운 오염을 늦춤
  • 촉감이 건조한 자연스러운 새틴 마감

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 무도장 플라스틱, 비닐, 고무 트림이 깨끗하고 건조하며 유분이 없는지 확인합니다 (필요 시 VARIUS 또는 DUCTILE로 사전 세정).
  2. 마이크로파이버 패드나 전용 트림 애플리케이터에 TPR을 소량 덜어 트림 표면에 고르게 펴 발라 줍니다.
  3. 질감 결을 따라 색이 고르게 살아날 때까지 작업한 뒤 깨끗한 마이크로파이버로 버핑해 건조한 자연 새틴 마감을 만듭니다.
  4. 건드리지 않고 경화시키며 초기 경화 동안에는 물과의 접촉을 피합니다.

TPR restores and protects unpainted plastics, vinyl, and rubber on cars, refreshing faded trim while shielding it from UV damage, oxidation, and fallout. Rather than adding shine, pigment, or artificial effects, it acts as a true protective coating that stabilizes color and texture and slows ongoing oxidation. The finish is dry to the touch with a natural satin appearance.

Key features

  • Evens out faded plastics and restores natural black depth
  • Helps shield against UV, acid rain, smog, and repeat washes
  • Slows progressive oxidation without changing the look
  • Seals the surface to slow new contamination
  • Natural satin finish, dry to the touch

Usage

  1. Make sure the plastic, vinyl, or rubber trim is clean, dry, and grease-free, using VARIUS or DUCTILE beforehand if needed.
  2. Apply a small amount of TPR to a microfiber pad or trim applicator and spread it evenly over the trim.
  3. Work the product into the texture until color is uniform, then buff with a clean microfiber to a dry natural satin finish.
  4. Let it cure undisturbed and avoid water during initial cure.

다른 이름: 라보, Labo, 라보코스메티카, TPR, Labo TPR, Labocosmetica TPR, 라보코스메티카 TPR, 티피알, Trim Plastic Restorer

View in English

출처

  • Labocosmetica 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

Labocosmetica의 다른 제품

  • Tack Booster
  • TEXIA - Fabric Cleaner Ready to Use
  • SATINO - Matte & Wrap Shampoo
  • ENERGO - Mineral stain remover
  • HPC 2.0 - Ceramic Coating
  • VERITAS - Prep swirl highlighter

같은 카테고리(Coating) 제품

  • Polish Angel Cosmic V2
  • PRIMA Car Care Banana Gloss
  • Ganbass Resin Protection+
  • SPASHAN Smaco Shooting Jackson
  • Liquid Laboratories Fusion8
  • Aqua Car Cosmetic E-coating PRO

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)