Labocosmetica 베네피시아 - 웨트 코트 희석비 & 사용 가이드

Labocosmetica 베네피시아 - 웨트 코트 희석비 pH 스펙 카드

BENEFICIA - Wet coat

BENEFICIA는 물과 만나면 활성화되는 스프레이 후 헹굼 방식 실란트로, 젖은 차체 위에 발수성과 광택을 더하는 피막을 남깁니다. 폴리머 매트릭스 구조 덕분에 산성, 알칼리, 용제에 대한 저항성과 함께 건조 시간을 줄여 작업이 더 빨라집니다. 어플리케이터나 클로스를 거의 사용하지 않아 스월 마크가 생길 수 있는 접촉을 줄여 줍니다.

브랜드
Labocosmetica
카테고리
Exterior : Coating
기본 희석 비율
RTU ~ 1:1
pH
neutral (7)
구매(한국)
쿠팡에서 보기 — 쿠팡 파트너스 활동의 일환으로 일정 수수료를 제공받을 수 있습니다
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU ~ 1:11:0-1

사용법

  1. 세차 후 차체를 젖은 상태로 유지하고 본넷이 너무 뜨겁지 않은지 확인한 뒤 한 패널씩 작업합니다.
  2. 약 40~60cm 거리에서 아래에서 위로 BENEFICIA를 분사하며, 겨울에는 원액, 여름에는 1대1 희석으로 사용합니다.
  3. 약 5초 정도 둔 뒤 물로 헹궈내고 깨끗한 마이크로파이버 수건으로 패널을 닦아 마무리합니다.

BENEFICIA is a spray and rinse style sealant that activates on contact with water and leaves a hydrophobic, glossy layer on a wet vehicle. The polymer matrix is designed to support resistance to acids, alkalis, and solvents while shortening drying time. Because it works without applicator pads or buffing cloths, it limits the contact that can cause swirl marks.

Key features

  • Spray on, rinse off application that limits cloth contact
  • Polymer matrix supports resistance to acids, alkalis, and solvents
  • Hydrophobic beading and sheeting on the surface
  • Adds gloss and slickness in a single step
  • Faster drying than a traditional sealant pass
  • Forgiving to apply for newer detailers
  • Co developed with sports car manufacturers

Usage

  1. Wash the car and keep the body wet, making sure the bonnet is not too hot, and work one panel at a time.
  2. Spray BENEFICIA from bottom to top at about 40 to 60 cm distance, neat in winter and 1 to 1 in summer.
  3. Wait about five seconds, then rinse with water and dry the panel with a clean microfiber towel.

다른 이름: 라보, Labo, 라보코스메티카, BENEFICIA, Labo BENEFICIA, Labocosmetica BENEFICIA, Wet Coat, 베네피치아, 라보 베네피치아, 라보코스메티카 베네피치아, 웨트 코트, 베네피시아

View in English

출처

관련 제품

Labocosmetica의 다른 제품

같은 카테고리(Coating) 제품

더 보기