휠 프로텍션
Wheel-protection
휠 프로텍션은 알루미늄 휠과 메도금 휠 전용으로 개발된 초고경도 경화계 코팅제입니다. 특히 메도금 휠은 코팅 없이는 조기 부식 및 열화가 발생하기 쉬워 필수적인 제품입니다. 알루미늄 휠에는 철분 제거를 용이하게 하는 효과도 있습니다. 현재 실현 가능한 휠 코팅 중 최고 수준의 제품으로 소개됩니다.
- 브랜드
- Ganbass
- 카테고리
- Exterior : Tire&Wheel Sealant
- 기본 희석 비율
- RTU
핵심 특징
- 휠 전용 초고경도 경화계 코팅
- 알루미늄 및 메도금 휠 전용 설계
- 메도금 휠의 조기 부식 및 열화 방지
- 알루미늄 휠의 철분 제거 용이화
- 시공 후 약 2시간에 실용 경화
희석 비율
- Exterior : Tire&Wheel Sealant — RTU (1:0) (기본)
사용법
- 세차로 휠의 모래와 이물질을 제거합니다.
- 완전히 건조시킨 후 실리콘 오프 등으로 탈지합니다.
- 마이크로파이버 클로스를 소량 잘라 병구에 대고 수 번 흔들어 클로스에 제품을 적십니다.
- 휠 전면에 고르게 도포하고, 즉시 마른 클로스로 잉여분을 닦아냅니다. 강하게 문지를 필요는 없습니다.
- 도포 후 다양한 각도에서 얼룩 없음을 확인하고 마무리합니다. 시공 후 약 2시간은 물에 닿지 않도록 주의합니다.
Wheel-protection is an ultra-high-hardness cured coating agent developed specifically for aluminum and chrome-plated wheels. Chrome and plated wheels in particular are prone to early deterioration without a coating, making this product essential. For aluminum wheels, it aids in making iron particle removal easier. It is described as among the highest-level wheel coatings currently achievable.
Key features
- Ultra-high-hardness cured coating for wheels
- Designed for aluminum and chrome-plated wheels
- Prevents early corrosion and deterioration of plated wheels
- Facilitates iron particle removal on aluminum wheels
- Approximately 2-hour working cure time after application
Usage
- Wash the wheel and remove sand and debris.
- Allow the wheel to dry completely, then degrease with silicone remover or equivalent.
- Cut a small piece of microfiber cloth, press it against the bottle opening, shake a few times to saturate the cloth with product.
- Apply evenly across the wheel surface and immediately wipe off any excess with a dry cloth — no need to scrub vigorously.
- Once applied, check all angles for evenness; the product reaches working hardness in approximately 2 hours. Avoid water contact during this time.
다른 이름: 간바스, ganbas, Ganbass Wheel-protection, 간바스 Wheel-protection, WP, 간바스 휠 프로텍션