철분 제거 러버 클로스 PRO
Iron Fallout Rubber Cloth PRO
케미컬 클레이바보다 도장에 대한 공격성이 낮은 특수 러버 소재로 차량 도장면의 철분 오염 및 페인트 미스트를 제거하는 전용 클로스입니다. 편물 구조로 제거된 철분이 도장에 다시 박히지 않도록 설계되어 철분 제거 작업 중 스크래치 위험을 크게 줄여 줍니다.
- 브랜드
- Ganbass
- 카테고리
- Tools : Wash Supplies
핵심 특징
- 클레이바보다 도장 손상 위험이 낮은 철분 제거
- 편물 구조로 제거된 철분이 도장에 재고착되지 않음
- 신차 도장 및 고탄성 코팅 도장에 적합
- 연마기 접근이 어려운 세부 부위의 철분 제거에 유효
- 충분한 세척 및 적절한 보관 후 재사용 가능
사용법
- 작업 전 도장면을 세차하여 흙과 오염물을 제거하세요.
- 러버 클로스의 러버면을 세척하여 이물질이 없는지 확인하세요.
- 시공면에 물 또는 스무서(윤활제)를 분사하면서 러버면을 도장에 가볍게 대고 균일하게 움직여 오염물을 제거하세요.
- 물 또는 스무서가 마르지 않도록 유지하면서 구역별로 작업을 진행하세요.
- 스무서 사용 후에는 마르기 전에 충분히 세척한 뒤 수분을 제거하세요.
A specialized rubber cloth for removing iron particles and paint mist from vehicle paint surfaces without the scratching risk associated with clay bars. Its knitted mesh structure allows extracted iron particles to pass through the weave rather than being dragged across the paint surface, significantly reducing the risk of scratching during decontamination.
Key features
- Removes iron particles with less paint damage than clay bars
- Knitted mesh structure prevents re-embedding of removed particles
- Suitable for new car paint and sensitive high-resilience coatings
- Effective in areas difficult to reach with a polisher
- Reusable after thorough cleaning and proper storage
Usage
- Wash the paint surface to remove mud and dirt before starting.
- Clean the rubber face of the cloth and confirm no debris is present.
- Spray water or a lubricating solution (smoother) onto the surface, then move the rubber face gently and evenly across the paint to remove contaminants.
- Continue working section by section, keeping the surface wet with water or lubricant throughout.
- If using a lubricant, rinse the cloth thoroughly before it dries, then blot dry the surface.
다른 이름: 간바스, ganbas, 鉄粉除去ラバークロス PRO, Ganbass 鉄粉除去ラバークロス PRO, 간바스 철분 제거 러버 클로스 PRO, Ganbass Iron Fallout Rubber Cloth PRO