아벨
AVELL
AVELL은 도포 및 닦아내기 과정에서 흠집을 최소화하는 시공 용이성에 특화된 1액형 경화형 글라스 코팅제입니다. 대부분의 경화형 코팅제와 달리 점도가 낮고 용제 함량을 줄여 마찰 흠집을 억제하며, 일반인도 프로 수준의 코팅 결과를 얻을 수 있도록 설계되었습니다. Ganbass의 HAZE, SPHERE 등 오버코트 제품과 함께 사용하면 장기적인 도장 보호 효과가 향상됩니다.
- 브랜드
- Ganbass
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- RTU
핵심 특징
- 시공이 쉬운 1액형 경화형 글라스 코팅
- 낮은 점도와 저용제로 시공 흠집 최소화
- 일반인과 전문가 모두 사용 가능
- HAZE/SPHERE 오버코트 제품과 함께 사용 권장
- 다른 경화형 코팅의 하지 프라이머로도 활용 가능
- 검은 미도장 수지 부품의 광택 복원에도 사용 가능
희석 비율
- Exterior : Coating — RTU (1:0) (기본)
사용법
- 세차 후 REBOOT 등의 하지 처리를 완료하여 도장면을 깨끗한 민낯 상태로 만듭니다.
- 도장이 건조된 것을 확인한 후 디테일 클로스를 약 7cm×7cm로 잘라 뚜껑으로 눌러 잡고 흔들어 액을 침투시킵니다.
- 지붕부터 사이드 패널 순서로 겹치는 동작으로 고르게 코팅제를 도포합니다. 일반 세단 기준 도포용 클로스 3~4장 사용.
- 도포가 완료되면 여러 각도에서 얼룩이 없는지 확인합니다.
- 약 2시간 후 오버코트(HAZE 또는 SPHERE)를 시공합니다. 야외 작업 등 시간 제약이 있을 경우 즉시 오버코트를 시공해도 무방합니다.
AVELL is a one-component hardening glass coating agent engineered for ease of application, allowing DIY users to achieve professional coating results with minimal scratch risk during the application and wipe-off process. Unlike most hardening coatings, it has low viscosity and low solvent content to reduce friction-induced scratches, and is designed to work in synergy with Ganbass overcoat products such as HAZE and SPHERE for long-term paint protection.
Key features
- Easy-application 1-component hardening glass coating
- Low viscosity and reduced solvent to minimize application scratches
- Suitable for DIY users as well as professionals
- Designed for use with HAZE/SPHERE overcoat products
- Applicable also as a primer under other hardening coatings
- Also usable on dark plastic trim for gloss restoration
Usage
- Wash the vehicle and complete all base prep including a REBOOT treatment to strip the paint surface to a clean, bare state.
- Confirm the paint is dry, then cut a detail cloth to approximately 7 cm × 7 cm and hold it with the supplied bottle cap; shake to soak the cloth with the product.
- Apply the coating evenly over the surface, working from the roof downward, using overlapping strokes; use 3–4 cloths for a standard sedan.
- After completing the application, inspect the surface from multiple angles for uneven patches.
- Apply the overcoat (HAZE or SPHERE) after approximately 2 hours; if working outdoors with time constraints, applying the overcoat immediately is acceptable.
다른 이름: 간바스, ganbas, Ganbass AVELL, 간바스 아벨, 간바스 AVELL, AVELL 硬化系コーティング剤