휠 클린 코트
Wheel Clean Coat
세정과 코팅을 동시에 수행하는 휠 전용 올인원 클린 코팅제입니다. 코팅 성능을 7, 세정 성능을 3의 비율로 배합하여 분사 코팅, 도포 코팅, 클리너 등 다양한 방법으로 사용할 수 있으며, 한 번의 세정만으로도 발수 보호 피막을 형성합니다.
- 브랜드
- Ganbass
- 카테고리
- Exterior : Tire&Wheel Sealant, Exterior : Tire&Wheel Cleaner
- 기본 희석 비율
- RTU
핵심 특징
- 세정과 코팅을 동시에 수행하는 휠 전용 올인원 제품
- 코팅 성능 중심의 7:3 배합
- 휠 표면에 발수 보호 피막 형성
- 특수 계면활성제로 휠 소재에 부드럽게 작용
- 브레이크 분진 및 오염물 재부착 경감
- 거듭 시공 시 발수력 향상
- 분사 코팅·도포 코팅·클리너로 다목적 활용 가능
희석 비율
- Exterior : Tire&Wheel Sealant — RTU (1:0) (기본)
- Exterior : Tire&Wheel Cleaner — RTU (1:0)
사용법
- 휠 상태에 맞는 세정제로 먼저 휠을 깨끗이 세정합니다.
- 본 제품을 휠 전체에 골고루 분사하거나, 크로스에 적당량 묻혀 휠면에 도포합니다.
- 건조하지 않는 범위에서 수십 초 정도 성분을 침투시킨 후 물로 충분히 헹굽니다.
- 발수 상태를 확인하여 발수가 약할 경우 동일 작업을 반복합니다.
- 블로어로 물방울을 날리거나 크로스로 닦아내어 마무리합니다.
An all-in-one clean coating agent dedicated to wheel surfaces that simultaneously removes dirt and forms a hydrophobic protective film. Formulated with a 7:3 ratio favouring coating performance over cleaning, it can be used as a spray-on coating, a rub-in coating, or a standalone cleaner, and delivers water-beading protection even from a single cleaning pass.
Key features
- All-in-one wheel cleaner and coating agent
- 7:3 formulation ratio favoring coating over cleaning
- Forms water-repellent hydrophobic film on wheel surface
- Gentle on wheel materials using special surfactants
- Reduces brake dust and dirt adhesion
- Layered application increases water-beading performance
- Usable as spray coating, rub-in coating, or cleaner
Usage
- Clean the wheel first using appropriate cleaners suited to its condition.
- Spray Wheel Clean Coat evenly over the entire wheel surface, or apply to a cloth and rub into the wheel face.
- Allow the product to dwell for several tens of seconds without letting it dry, then rinse thoroughly with water.
- Check that the surface is beading; if beading is weak, repeat the application.
- Blow off or wipe away remaining water droplets to finish.
다른 이름: 간바스, ganbas, Ganbass Wheel Clean Coat, 간바스 Wheel Clean Coat, 간바스 휠 클린 코트, ホイール専用クリーンコート剤