글라스 클린 코팅

Glass Clean Coating

글라스 클린 코팅은 자동차 창유리용 클리너와 발수 코팅을 겸한 복합 제품입니다. 외부 유리에 부착된 경미한 유막과 배기가스 오염을 제거하는 동시에 발수 피막을 형성합니다. 반복 시공으로 전용 유리 코팅에 준하는 발수 성능을 구현할 수 있습니다.

브랜드
Ganbass
카테고리
Exterior : Glass Cleaner, Exterior : Glass Sealant
기본 희석 비율
RTU

핵심 특징

희석 비율

사용법

  1. 유화제 성분이 분리되어 있으므로 사용 전 충분히 흔들어 주십시오.
  2. 유리 표면에 단단한 모래알이나 심한 오염이 없는지 확인하고, 오염이 심한 경우 예비 세척하십시오.
  3. 유리 표면이 건조한 것을 확인한 후 유리 또는 마른 클로스에 적당량을 분사하여 창유리를 닦아내십시오.
  4. 오염과 잔여 제품을 깨끗한 마른 클로스로 닦아내십시오.
  5. 클리너로만 사용하는 경우 즉시 물을 묻혀도 무방하지만, 발수 피막 형성이 목적이라면 시공 후 약 10분간 건조하십시오.
  6. 더 강한 발수 성능을 원하는 경우 연속으로 2~3회 중복 시공하십시오.

Glass Clean Coating is a combination glass cleaner and water-repellent coating agent for automotive window glass. It removes light oil film and exhaust-related deposits from the exterior glass surface while simultaneously building a hydrophobic film. Repeated application strengthens the water-repellent layer to a level comparable to a dedicated glass coating.

Key features

  • Cleans light oil film and exhaust deposits from glass
  • Forms water-repellent coating film in a single step
  • Compatible for use over existing glass coatings
  • Repeated application builds stronger hydrophobic film
  • Usable as emergency treatment for bird droppings and insects on-the-go

Usage

  1. Shake the bottle well before use to remix the emulsifier.
  2. Check the glass for hard grit or heavy soiling; pre-rinse if necessary.
  3. Confirm the glass surface is dry, then spray an appropriate amount onto the glass or a dry cloth and clean the window surface.
  4. Wipe off the lifted dirt and excess product with a clean dry cloth.
  5. If using as a cleaner only, wetting the glass immediately after is fine; for a water-repellent coating finish, allow to dry for approximately 10 minutes without disturbing the surface.
  6. For stronger hydrophobic performance, apply 2–3 coats in succession.

다른 이름: 간바스, ganbas, Ganbass Glass Clean Coating, GCC, 간바스 글라스 클린 코팅, 간바스 GCC, 窓ガラスクリーンコーティング剤

View in English

출처