Fictech 카 리프트 엑스퍼트 리스토러 608 희석비 & 사용 가이드

Fictech 카 리프트 엑스퍼트 리스토러 608 희석비 pH 스펙 카드

Car Lift Xpert Restorer 608

카 리프트 엑스퍼트 라인의 SiO2 기반 세라믹 코팅으로 외장 플라스틱과 고무 전용입니다. 이중 작용을 하여 바랜 외장 트림의 본래 진한 검정 마무리를 즉시 되살린 뒤 이를 보호해 자외선·도로 염분·기후로부터 지켜냅니다. 자동차는 물론 모터사이클·캠퍼밴·쿼드에도 사용할 수 있습니다.

브랜드
Fictech
카테고리
Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-07-12

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 표면을 세척·건조·제염한 뒤 픽테크 패독 같은 IPA 프렙으로 탈지합니다.
  2. 병을 흔든 후 스웨이드/극세사 천을 씌운 어플리케이터에 몇 방울 떨어뜨립니다.
  3. 60x60 cm 구역씩 겹치는 교차 방식으로 시공합니다.
  4. 약 30~60초 플래시 후 깨끗한 극세사 타월로 잔여물을 닦아냅니다.
  5. 하이스폿을 확인해 평탄화한 뒤 다음 구역을 반복합니다.
  6. 최소 24시간 물 접촉을 피하고 완전 경화를 위해 7일간 세차하지 않습니다.

A SiO2-based ceramic coating from the Car Lift Xpert line dedicated to exterior plastics and rubber. It has a dual action: it instantly restores the original deep-black finish of faded exterior trim and then protects it, shielding against UV, road salt and the weather. Suitable for cars as well as motorcycles, camper vans and quads.

Key features

  • SiO2 ceramic coating for exterior plastic and rubber
  • Restores original deep-black finish
  • Protects against UV, salt and weather
  • Long-lasting hydrophobic layer
  • Wipe-on, wipe-off application

Usage

  1. Wash, dry and decontaminate the surface, then degrease it with an IPA prep such as FicTech Paddock.
  2. Shake the bottle and apply a few drops onto a coating applicator wrapped in a suede/microfibre cloth.
  3. Work one 60x60 cm section at a time using overlapping cross-hatch motions.
  4. Let the coating flash for about 30–60 seconds, then buff off the residue with a clean microfibre towel.
  5. Inspect for high spots and level them, then repeat on the next section.
  6. Allow at least 24 hours without water contact and avoid washing the vehicle for 7 days to fully cure.

다른 이름: 피크테크, fic, FicTech Car Lift Xpert Restorer 608, Fictech Car Lift Xpert Restorer 608, 608, FicTech 608, 픽테크 카 리프트 엑스퍼트 리스토러 608

View in English

출처

관련 제품

Fictech의 다른 제품

같은 카테고리(Coating) 제품

더 보기