Fictech 카 리프트 엑스퍼트 클래식 602 희석비 & 사용 가이드

Fictech 카 리프트 엑스퍼트 클래식 602 희석비 pH 스펙 카드

Car Lift Xpert Classic 602

픽테크 카 리프트 엑스퍼트 라인의 혁신적인 SiO2 기반 세라믹 쿼츠 코팅으로, 모든 도장면에 오래가는 효과적인 보호를 제공합니다. 닦아 바르고 닦아내는 방식으로 손시공하며, 단단하고 소수성인 보호막을 형성해 물·먼지·오염을 밀어내고 광택을 깊게 하며 일상 관리를 훨씬 쉽게 합니다.

브랜드
Fictech
카테고리
Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-07-12

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 표면을 세척·건조·제염한 뒤 픽테크 패독 같은 IPA 프렙으로 탈지합니다.
  2. 병을 흔든 후 스웨이드/극세사 천을 씌운 어플리케이터에 몇 방울 떨어뜨립니다.
  3. 60x60 cm 구역씩 겹치는 교차 방식으로 시공합니다.
  4. 약 30~60초 플래시 후 깨끗한 극세사 타월로 잔여물을 닦아냅니다.
  5. 하이스폿을 확인해 평탄화한 뒤 다음 구역을 반복합니다.
  6. 최소 24시간 물 접촉을 피하고 완전 경화를 위해 7일간 세차하지 않습니다.

A revolutionary SiO2-based ceramic quartz coating from FicTech's Car Lift Xpert line that provides durable, effective protection for all painted bodywork. Applied by hand as a wipe-on / wipe-off coating, it builds a hard, hydrophobic layer that repels water, dirt and contaminants, deepens gloss and makes routine maintenance far easier.

Key features

  • SiO2 ceramic quartz protection
  • Strong hydrophobic, self-cleaning effect
  • Deepens gloss on all paint colours
  • Easy wipe-on, wipe-off hand application
  • Makes routine maintenance easier

Usage

  1. Wash, dry and decontaminate the surface, then degrease it with an IPA prep such as FicTech Paddock.
  2. Shake the bottle and apply a few drops onto a coating applicator wrapped in a suede/microfibre cloth.
  3. Work one 60x60 cm section at a time using overlapping cross-hatch motions.
  4. Let the coating flash for about 30–60 seconds, then buff off the residue with a clean microfibre towel.
  5. Inspect for high spots and level them, then repeat on the next section.
  6. Allow at least 24 hours without water contact and avoid washing the vehicle for 7 days to fully cure.

다른 이름: 피크테크, fic, FicTech Car Lift Xpert Classic 602, Fictech Car Lift Xpert Classic 602, 602, FicTech 602, 픽테크 카 리프트 엑스퍼트 클래식 602

View in English

출처

관련 제품

Fictech의 다른 제품

같은 카테고리(Coating) 제품

더 보기