Fictech Car Lift Xpert Restorer 608 Dilution Ratios & User Guide

Fictech Car Lift Xpert Restorer 608 dilution ratio and pH specification chart

카 리프트 엑스퍼트 리스토러 608

Fictech Car Lift Xpert Restorer 608 — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/fictech/car-lift-xpert-restorer-608

Fictech 카 리프트 엑스퍼트 리스토러 608 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/fictech/car-lift-xpert-restorer-608

A SiO2-based ceramic coating from the Car Lift Xpert line dedicated to exterior plastics and rubber. It has a dual action: it instantly restores the original deep-black finish of faded exterior trim and then protects it, shielding against UV, road salt and the weather. Suitable for cars as well as motorcycles, camper vans and quads.

카 리프트 엑스퍼트 라인의 SiO2 기반 세라믹 코팅으로 외장 플라스틱과 고무 전용입니다. 이중 작용을 하여 바랜 외장 트림의 본래 진한 검정 마무리를 즉시 되살린 뒤 이를 보호해 자외선·도로 염분·기후로부터 지켜냅니다. 자동차는 물론 모터사이클·캠퍼밴·쿼드에도 사용할 수 있습니다.

Brand
Fictech
Categories
Exterior : Coating
Primary dilution
RTU
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-07-12

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU1:0

Usage

  1. Wash, dry and decontaminate the surface, then degrease it with an IPA prep such as FicTech Paddock.
  2. Shake the bottle and apply a few drops onto a coating applicator wrapped in a suede/microfibre cloth.
  3. Work one 60x60 cm section at a time using overlapping cross-hatch motions.
  4. Let the coating flash for about 30–60 seconds, then buff off the residue with a clean microfibre towel.
  5. Inspect for high spots and level them, then repeat on the next section.
  6. Allow at least 24 hours without water contact and avoid washing the vehicle for 7 days to fully cure.

핵심 특징

  • 외장 플라스틱·고무용 SiO2 세라믹 코팅
  • 본래의 진한 블랙 마무리 복원
  • 자외선·염분·기후로부터 보호
  • 오래가는 소수성 보호막
  • 닦아 바르는 시공

사용법

  1. 표면을 세척·건조·제염한 뒤 픽테크 패독 같은 IPA 프렙으로 탈지합니다.
  2. 병을 흔든 후 스웨이드/극세사 천을 씌운 어플리케이터에 몇 방울 떨어뜨립니다.
  3. 60x60 cm 구역씩 겹치는 교차 방식으로 시공합니다.
  4. 약 30~60초 플래시 후 깨끗한 극세사 타월로 잔여물을 닦아냅니다.
  5. 하이스폿을 확인해 평탄화한 뒤 다음 구역을 반복합니다.
  6. 최소 24시간 물 접촉을 피하고 완전 경화를 위해 7일간 세차하지 않습니다.

Also known as: 피크테크, fic, FicTech Car Lift Xpert Restorer 608, Fictech Car Lift Xpert Restorer 608, 608, FicTech 608, 픽테크 카 리프트 엑스퍼트 리스토러 608

한국어로 보기

Sources

Related products

More from Fictech

More Coating products

Explore more