Fictech 카 글리스 601 V2 희석비 & 사용 가이드

Fictech 카 글리스 601 V2 희석비 pH 스펙 카드

Car Gliss 601 V2

카 글리스 601 V2는 SiO2, 카나우바, 불소화합물을 조합한 프리미엄 마감용 실란트로, 사용 직후 도장면에 광택과 매끈함을 더하고 관리를 쉽게 해준다. 세차나 폴리싱 후 마무리 단계나 기존 보호막 유지관리용으로 적합하며, 미끄러짐성, 물방울 맺힘, 도로 오염물 부착 저항성을 향상시킨다.

브랜드
Fictech
카테고리
Exterior : Coating
기본 희석 비율
RTU
pH
acid (5)
최종 업데이트
2026-07-06

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 차량을 세차하고 완전히 건조시키며, 오염이 심한 경우 먼저 디콘타미네이션을 진행한다.
  2. 제품을 표면 일부 구역이나 마이크로파이버 어플리케이터 패드에 직접 분사한다.
  3. 패드를 이용해 직선 또는 원형으로 문질러 제품을 고르게 펴 바른다.
  4. 깨끗하고 마른 마이크로파이버 타월로 즉시 닦아내어 광택 있고 균일한 마감을 만든다.
  5. 제품이 완전히 경화되도록 약 12시간 동안 차량을 건드리지 않고 둔다.

Car Gliss 601 V2 is a premium finishing sealant combining SiO2, carnauba and fluorocarbons to give paint extra gloss, smoothness and easier upkeep right after use. It is meant for finishing after a wash or correction, or for topping up an existing protection, and it improves slickness, beading and resistance to road film buildup.

Key features

  • SiO2 + carnauba + fluorocarbon sealant blend
  • Adds gloss, depth and smooth slick surface feel
  • Improves water beading and road-film resistance
  • Ready to use, no dilution needed
  • Suited for finishing after wash/correction or topping up existing protection

Usage

  1. Wash and thoroughly dry the vehicle, decontaminating first if the surface is contaminated.
  2. Spray the product directly onto a small section of the surface or onto a microfiber applicator pad.
  3. Spread the product evenly with the pad using straight or circular motions to cover the area.
  4. Wipe immediately with a clean, dry microfiber towel until a glossy, even finish is achieved.
  5. Let the vehicle sit for about 12 hours undisturbed so the product can fully cure.

다른 이름: 피크테크, fic, CAR GLISS 601 V2, Fictech CAR GLISS 601 V2, FT CAR GLISS 601 V2, 601, 픽테크 카 글리스 601 V2, 카 글리스 601

View in English

출처

관련 제품

Fictech의 다른 제품

같은 카테고리(Coating) 제품

더 보기