Collinite 프로 폴리시 희석비 & 사용 가이드

Collinite 프로 폴리시 희석비 pH 스펙 카드

Pro Polish

마이크로 어브레시브로 미세 스크래치, 스월, 워터 스팟, 가벼운 산화, 세차 자국 같은 경미한 도장 결함을 정리하는 클리어코트 안전 머신 폴리시입니다. 매끄럽고 광택 있는 면으로 떨어지면서 콜리나이트 라스트 스텝 왁스(No. 845·No. 476s·No. 915) 도포 전 면 정리에 적합하고, 왁스·실리콘은 들어 있지 않습니다.

브랜드
Collinite
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 차량을 세차하고 건조합니다(필요 시 클레이바 사용).
  2. 잘 흔든 뒤 깨끗한 DA 폴리싱 패드에 콩알 크기로 3~4개 도포합니다.
  3. 2x2 ft 구역에서 적당한 압력과 크로스해치 패턴으로 작업합니다.
  4. 깨끗한 마이크로파이버 타월로 잔여물을 닦아냅니다.
  5. 콜리나이트 왁스(No. 845·476s·915) 또는 실런트로 후속 도포합니다.
  6. 시공 전 눈에 잘 띄지 않는 부위에서 테스트합니다.

Clear-coat-safe machine polish that uses micro abrasives to address minor paint defects such as fine scratches, swirls, water spots, mild oxidation and wash marks. It finishes down to a smooth, glossy surface and preps the paint for follow-up wax protection from No. 845, No. 476s or No. 915. Contains no waxes or silicones.

Key features

  • Removes fine scratches, swirls, water spots and wash marks
  • Best results by dual action polisher
  • Clear-coat safe and machine-friendly
  • Preps the paint for follow-up wax or ceramic
  • No waxes or silicones
  • Not for use on rubber or black trim

Usage

  1. Wash and dry the vehicle, claying if needed.
  2. Shake well and apply 3-4 pea-sized dots onto a clean DA polishing pad.
  3. Work the polish over a 2x2 ft section using moderate pressure and crosshatch passes.
  4. Wipe residue off with a clean microfiber towel.
  5. Follow up with a Collinite wax (No. 845, 476s or 915) or sealant.
  6. Test in a small inconspicuous area first.

다른 이름: Coll, 콜리나이트, 콜리나, 콜리, Collinite Pro Polish, 콜리나이트 프로 폴리시, No. 390, Collinite No. 390, 콜리나이트 390

View in English

출처

관련 제품

Collinite의 다른 제품

같은 카테고리(Polishes) 제품

더 보기