Bilt Hamber 코로솔 희석비 & 사용 가이드

Bilt Hamber 코로솔 희석비 pH 스펙 카드

Korrosol

Korrosol은 pH가 조절된 비산성·비알칼리성 수성 철분 제거제로, 도장면, 휠, 유리에 박힌 철분 오염을 녹여 줍니다. 컬러 체인지 처방이 철분 입자와 반응해 보라색으로 변하며 활성 반응을 보여주고 래커를 포함한 자동차 도장 마감재에 안전하게 사용할 수 있습니다.

브랜드
Bilt Hamber
카테고리
Exterior : Remover
기본 희석 비율
RTU
pH
neutral (6)
구매(한국)
쿠팡에서 보기 — 쿠팡 파트너스 활동의 일환으로 일정 수수료를 제공받을 수 있습니다
최종 업데이트
2026-07-31

핵심 특징

희석 비율

용도희석비율
Exterior : Remover (기본)RTU1:0

사용법

  1. 그늘에서 식힌 도장면 또는 휠을 먼저 물로 헹궈 느슨한 오염을 제거합니다.
  2. Korrosol을 잘 흔든 뒤 원액으로 오염 부위가 충분히 적셔질 만큼 분사합니다.
  3. 약 3~5분 체류시키며 투명한 액이 보라색으로 변하는 반응을 관찰합니다.
  4. 오염이 심하면 부드러운 브러시나 워시미트로 살짝 애지테이션하고 마르기 전에 필요 시 재도포합니다.
  5. 보라색 잔여물이 완전히 사라질 때까지 깨끗한 물이나 고압수로 충분히 헹구고 샴푸 세차로 마무리합니다.

Korrosol is a pH-controlled, non-acid and non-alkaline water-based iron fallout remover that dissolves embedded ferrous contamination from paint, wheels and glass. The colour-changing formula bleeds purple as it reacts with iron particles and is safe on automotive paint finishes, including lacquers.

Key features

  • pH-controlled, non-acid and non-alkaline
  • Colour-changing iron reaction indicator
  • Safe on paint, wheels, glass and lacquers
  • 1L bottle with trigger spray
  • Works on embedded ferrous fallout

Usage

  1. Pre-rinse the cool, shaded paint or wheels to remove loose dirt.
  2. Shake well and spray Korrosol neat onto the contaminated panel or wheel until fully wet.
  3. Allow about 3 to 5 minutes dwell and watch the clear liquid turn purple as it complexes embedded iron.
  4. For heavy contamination, agitate gently with a soft brush or wash mitt and reapply before drying if needed.
  5. Rinse thoroughly with clean water or a pressure washer until all purple residue is gone, then follow with a shampoo wash.

다른 이름: 빌트햄버, 빌트, 빌트함버, bilt, Bilt Hamber Korrosol, BH Korrosol, Korrosol Iron Remover, Korrosol Fallout Remover, 빌트햄버 코로솔, 코로솔 폴아웃 리무버, Korrosol Iron Fallout

View in English

출처

관련 제품

Bilt Hamber의 다른 제품

같은 카테고리(Remover) 제품

더 보기