Sonax 프로피라인 컷+피니시 희석비 & 사용 가이드

Sonax 프로피라인 컷+피니시 희석비 pH 스펙 카드

PROFILINE Cut+Finish

니브, 오버스프레이, 샌딩 자국 등 도장 결함을 빠르게 제거하는 1단계 고연마 컴파운드입니다. 강력한 연마력과 높은 광택을 동시에 구현하며, 회전식 및 오비탈 폴리셔 모두에 호환됩니다.

브랜드
Sonax
카테고리
Exterior : Polishes
기본 희석 비율
RTU
구매(한국)
쿠팡에서 보기 — 쿠팡 파트너스 활동의 일환으로 일정 수수료를 제공받을 수 있습니다
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 회전식 폴리셔에 하드 또는 미디엄 폼 패드를 장착하고 소량의 제품을 도포합니다.
  2. 기계를 약간 기울여 제품이 패드 전체에 고르게 퍼지도록 합니다.
  3. 중속으로 섹션별 작업하며 결함 제거에 필요한 적절한 압력을 가합니다.
  4. 깨끗한 극세사 타월로 잔여물을 닦아내고 밝은 조명 아래에서 표면을 확인합니다.

A single-stage, high-cut compound designed for fast removal of refinishing defects including nibs, overspray mist, and sanding marks. The formula combines strong abrasion with a high-gloss result and works on both rotary and orbital polishers.

Key features

  • Single-stage high-cut compound
  • Removes nibs, overspray, and sanding marks
  • High abrasion with high-gloss result
  • Compatible with rotary and orbital polishers
  • Minimal product consumption

Usage

  1. Mount a hard or medium foam pad on a variable-speed rotary polisher and apply a small amount of product.
  2. Polish at a slight tilt of the machine to distribute product evenly across the pad.
  3. Work section by section at medium speed, increasing pressure as needed to remove defects.
  4. Wipe off residue with a clean microfibre cloth and inspect the surface under good lighting.

다른 이름: 소낙스, SONAX PROFILINE Cut+Finish, PCF, SONAX PCF, 02253000, 소낙스 컷 피니시, 소낙스 PCF, 컷 앤 피니시, 소낙스 원스텝 폴리시

View in English

출처

관련 제품

Sonax의 다른 제품

같은 카테고리(Polishes) 제품

더 보기