Yum Foam
얌 폼
Yum Foam is a pH-neutral (pH 7) pre-wash foam engineered with a maximum raw-material content to blanket the car and loosen dirt before any contact is made. Because the pH is neutral, existing wax, sealant and ceramic coating protection stays intact, and the formula is designed to rinse away cleanly without reactivating. Safe on paint, vinyl, glass, engine bays, tyres, trims, rims and alloy wheels.
얌 폼은 pH 중성(pH 7)의 프리워시 폼으로, 원료 함량을 최대치로 끌어올려 접촉 전에 차량을 두껍게 덮어 오염물을 풀어내도록 설계되었습니다. 중성 pH 덕분에 기존 왁스, 실란트, 세라믹 코팅 보호막을 그대로 유지하며, 헹굼 단계에서 재활성화되지 않고 깔끔하게 씻겨 내려갑니다. 도장면, 비닐, 유리, 엔진룸, 타이어, 트림, 림, 알로이 휠에 안전합니다.
- Brand
- Yum Cars
- Categories
- Exterior : Foam
- Primary dilution
- 1:7~1:10
- pH
- neutral (7)
Key features
- pH-neutral (pH 7) formula
- Dense pre-wash foam coverage
- Will not strip waxes, sealants or ceramic coatings
- Rinse-clean formula that does not reactivate
- Safe on paint, vinyl, glass, engine bays, tyres and wheels
- Emulsifies and lifts dirt for easier rinsing
Dilution
- Exterior : Foam — 1:7~1:10 (1:7-10) (primary)
Usage
- Give the vehicle a quick rinse first to remove loose surface debris.
- Optionally pre-treat the lower panels with Yum Citrus before applying Yum Foam.
- Pour between about 100 ml and 150 ml of Yum Foam into an MTM PF22.2 foam cannon and fill the rest with water.
- Cover the entire vehicle with foam and allow it to dwell for around 5 to 10 minutes.
- Rinse thoroughly from the top of the vehicle downward.
- Proceed to the contact wash phase using Yum Wash.
핵심 특징
- pH 중성(pH 7) 포뮬러
- 촘촘한 프리워시 폼 커버리지
- 왁스, 실란트, 세라믹 코팅 손상 없음
- 재활성화 없이 깔끔하게 헹궈지는 포뮬러
- 도장면, 비닐, 유리, 엔진룸, 타이어, 휠에 안전
- 오염물을 유화·부상시켜 헹굼을 손쉽게
사용법
- 표면의 가벼운 오염을 제거하기 위해 차량을 먼저 가볍게 헹굽니다.
- 필요 시 얌 폼 도포 전 하부 패널에 얌 시트러스를 미리 처리합니다.
- MTM PF22.2 폼캐논에 얌 폼 약 100~150ml를 넣고 나머지를 물로 채웁니다.
- 차량 전체를 폼으로 뒤덮고 약 5~10분간 그대로 둡니다.
- 위에서 아래 방향으로 전체를 깨끗이 헹궈냅니다.
- 얌 워시로 접촉 세차 단계를 이어갑니다.