Hydro Snow
하이드로 스노우
Hydro Snow is a pH-neutral snow foam that produces ultra-thick, shaving cream-like foam to cling to dirt and grime, safely lifting contamination from paintwork before a contact wash. With a 10:1 dilution ratio, it is highly concentrated and compatible with all waxes, sealants, and ceramic coatings — it will not strip existing protection. It is formulated to work with the HYDRO Spray Bottle, removing the need for a jet wash snow foam attachment.
하이드로 스노우는 pH 중성 스노우 폼으로, 면도 크림처럼 두꺼운 거품이 오염물에 밀착되어 접촉 세차 전 도장면에서 오염물을 안전하게 들어올립니다. 10:1 희석 비율의 고농축 제품으로 모든 왁스·실란트·세라믹 코팅에 호환되며 기존 보호막을 벗겨내지 않습니다. 하이드로 스프레이 보틀과 함께 사용하도록 설계되어 고압 세척기 없이도 효과적인 전처리가 가능합니다.
- Brand
- HYDRO
- Categories
- Exterior : Foam
- Primary dilution
- 1:10
Key features
- Ultra-thick, cling foam formula
- 10:1 dilution ratio
- pH neutral — safe on all waxes, sealants, and coatings
- Safe on all exterior surfaces including wheels and trim
- Works with HYDRO Spray Bottle — no jet wash required
- Lifts grime for swirl-free pre-wash
Dilution
- Exterior : Foam — 1:10 (1:10) (primary)
Usage
- Measure 10 parts water and 1 part Hydro Snow into your spray bottle.
- Apply the foam all over the vehicle, over or after rinsing off Hydro Pre if used.
- Allow to dwell for 3–5 minutes without letting it dry.
- Rinse off thoroughly, then proceed with a contact wash if required.
핵심 특징
- 초두꺼운 밀착 거품 성분
- 10:1 희석 비율
- pH 중성 — 모든 왁스·실란트·코팅에 안전
- 휠 및 트림을 포함한 모든 외부 표면에 안전
- 하이드로 스프레이 보틀과 호환 — 고압 세척기 불필요
- 미세 스크래치 없는 전처리를 위한 오염물 부상
사용법
- 스프레이 보틀에 물 10에 하이드로 스노우 1의 비율로 계량합니다.
- 하이드로 프리를 사용한 경우 헹군 후 또는 위에, 차량 전체에 폼을 도포합니다.
- 건조되지 않도록 주의하며 3~5분간 방치합니다.
- 완전히 헹궈낸 후 필요에 따라 접촉 세차를 진행합니다.
Also known as: 하이드로, HYDRO Snow, HSN, HYDRO HSN, 하이드로 HSN
한국어로 보기