XPEL One Step Dilution Ratios & User Guide

XPEL One Step dilution ratio and pH specification chart

원 스텝

XPEL One Step — Exterior : Polishes. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/xpel/one-step

XPEL 원 스텝 — Exterior : Polishes. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/xpel/one-step

A fast, all-in-one compound and polish that cuts and refines in a single step, removing sanding marks up to 2000 grit while leaving a high-gloss finish. Silicone-free and effective on clear coat, single-stage, and lacquer paints, making it ideal for one-step corrections.

한 번의 작업으로 컷팅과 마무리를 동시에 하는 빠른 올인원 콤파운드 겸 폴리시로, 2000방까지의 샌딩 자국을 제거하면서 높은 광택을 남깁니다. 실리콘 프리이며 클리어코트·싱글스테이지·래커 도장에 효과적이어서 원스텝 보정에 이상적입니다.

Brand
XPEL
Categories
Exterior : Polishes
Primary dilution
RTU
Where to buy
Search on Amazon (US)
Last updated
2026-08-14

How it works

  • Petroleum solvent — Dissolves tar and grease; best not left to dwell on paint.

Disclosed ingredients

IngredientCASFunction
Light aliphatic solvent naphtha64742-48-9Solvent

Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.

Key features

  • All-in-one compound and polish that cuts and finishes in one step
  • Removes sanding marks up to 2000 grit with a high-gloss result
  • Silicone-free; works on clear coat, single-stage, and lacquer
  • Time-saving one-step correction; available in 8 oz and 32 oz

Dilution

UseDilutionRatio
Exterior : Polishes (primary)RTU1:0

Usage

  1. Shake well, then place three to four pea-sized drops onto a clean all-in-one or medium machine pad.
  2. Dab the pad on the panel, then work the product at moderate speed in overlapping passes over a small (about 2ft x 2ft) area.
  3. Continue until the product goes clear, cutting and polishing the paint in a single pass.
  4. Wipe the residue off with a clean microfiber towel; no separate finishing polish is required for most finishes.

핵심 특징

  • 한 단계로 컷팅과 마무리를 동시에 하는 올인원 콤파운드 겸 폴리시
  • 2000방까지의 샌딩 자국 제거, 높은 광택 마무리
  • 실리콘 프리, 클리어코트·싱글스테이지·래커에 사용 가능
  • 시간을 아끼는 원스텝 보정, 8oz·32oz 제공

사용법

  1. 잘 흔든 뒤 깨끗한 올인원 또는 미디엄 머신 패드에 완두콩 크기로 3~4방울 짭니다.
  2. 패드를 패널에 두드려 묻힌 후 약 60cm×60cm 구역을 중속으로 겹쳐 가며 작업합니다.
  3. 제품이 투명해질 때까지 작업해 한 번의 패스로 컷팅과 폴리싱을 동시에 진행합니다.
  4. 깨끗한 마이크로파이버 타월로 잔여물을 닦아냅니다. 대부분의 도장에서는 별도의 마무리 폴리시가 필요 없습니다.

Also known as: XPEL One Step, XPEL One Step 006, One Step 006, XPEL One Step Compound Polish, 엑스펠 원 스텝, 엑스펠 원 스텝 006

한국어로 보기

Sources

  • XPEL official product page
  • Safety Data Sheet (SDS / MSDS)

Related products

More from XPEL

  • Medium Polishing Compound
  • PPF Surface Prep
  • Fine Polishing Compound
  • Absorbent Installation Mat
  • Install Squeegees
  • Foam Soap

More Polishes products

  • Phoenix E.O.D FAB-ulous Finishing Polish V2
  • Angelwax Resurrection Extreme
  • Koch Chemie THE FINISHER PowerSpeedPolish
  • ValetPRO Advanced Compound
  • Nanolex Medium Cut Polish
  • Chemical Guys V38 Paint Correction Finishing Polish

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)