Vonixx V-Leather Dilution Ratios & User Guide

Vonixx V-Leather dilution ratio and pH specification chart

브이 레더

Vonixx V-Leather — Interior : Leather Sealants. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/vonixx/v-leather

Vonixx 브이 레더 — Interior : Leather Sealants. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/vonixx/v-leather

V-Leather is a nano-silicone ceramic coating for leather that forms a flexible, near-invisible protective film with stated durability of up to about one year. It adds UV protection, helps inhibit bacterial and fungal growth, reduces friction marks, and keeps leather breathable and soft.

V-레더는 가죽 표면용 나노 실리콘 세라믹 코팅으로, 유연하고 거의 보이지 않는 보호 피막을 형성합니다. 지속 기간은 약 1년까지로 안내되며, UV 차단과 세균·곰팡이 번식 억제, 마찰 흔적 감소를 돕고 가죽의 통기성과 부드러움을 유지합니다.

Brand
Vonixx
Categories
Interior : Leather Sealants
Primary dilution
RTU
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Interior : Leather Sealants (primary)RTU1:0

Usage

  1. Clean the leather with a leather cleaner, then wipe with a damp microfiber to confirm the surface is residue-free.
  2. Let the leather air-dry or speed-dry with a dry microfiber, since moisture can interfere with adhesion.
  3. Apply a few drops of V-Leather to the included foam applicator and spread evenly across a section no larger than 50×50 cm, checking for streaks.
  4. For a matte look, buff with a dry microfiber; for a satin look, leave as applied. A second coat is possible after 30 minutes; partial cure is 6 hours and full cure is 72 hours.

핵심 특징

  • 실리콘 나노입자 기반 가죽용 세라믹 코팅
  • 지속 기간 약 1년까지로 안내
  • 유연하고 거의 보이지 않는 보호 피막
  • UV 차단
  • 곰팡이 및 세균 번식 억제 보조
  • 마찰 흔적 및 청바지 자국 감소
  • 일반 액체 및 먼지 오염 방지
  • 천연·합성 가죽 및 소프트터치 패널에 적용 가능

사용법

  1. 가죽 클리너로 가죽을 꼼꼼히 세정한 뒤 젖은 마이크로파이버로 닦아 잔류물이 없는지 확인합니다.
  2. 습기가 밀착력을 떨어뜨릴 수 있으므로 가죽을 자연 건조하거나 마른 마이크로파이버로 건조합니다.
  3. 동봉된 폼 어플리케이터에 V-레더를 몇 방울 떨어뜨려 50×50cm 이하 구역에 고르게 펴 바르며 얼룩 여부를 확인합니다.
  4. 무광 마감은 마른 마이크로파이버로 닦아내고, 새틴 마감은 그대로 둡니다. 30분 후 2차 도포 가능하며, 부분 경화 6시간, 완전 경화 72시간입니다.

Also known as: 보닉스, Vonix, Vonixx V-Leather, 보닉스 브이 레더

한국어로 보기

Sources

Related products

More from Vonixx

More Leather Sealants products

Explore more