Vonixx 브이 레더 희석비 & 사용 가이드

Vonixx 브이 레더 희석비 pH 스펙 카드

V-Leather

V-레더는 가죽 표면용 나노 실리콘 세라믹 코팅으로, 유연하고 거의 보이지 않는 보호 피막을 형성합니다. 지속 기간은 약 1년까지로 안내되며, UV 차단과 세균·곰팡이 번식 억제, 마찰 흔적 감소를 돕고 가죽의 통기성과 부드러움을 유지합니다.

브랜드
Vonixx
카테고리
Interior : Leather Sealants
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Interior : Leather Sealants (기본)RTU1:0

사용법

  1. 가죽 클리너로 가죽을 꼼꼼히 세정한 뒤 젖은 마이크로파이버로 닦아 잔류물이 없는지 확인합니다.
  2. 습기가 밀착력을 떨어뜨릴 수 있으므로 가죽을 자연 건조하거나 마른 마이크로파이버로 건조합니다.
  3. 동봉된 폼 어플리케이터에 V-레더를 몇 방울 떨어뜨려 50×50cm 이하 구역에 고르게 펴 바르며 얼룩 여부를 확인합니다.
  4. 무광 마감은 마른 마이크로파이버로 닦아내고, 새틴 마감은 그대로 둡니다. 30분 후 2차 도포 가능하며, 부분 경화 6시간, 완전 경화 72시간입니다.

V-Leather is a nano-silicone ceramic coating for leather that forms a flexible, near-invisible protective film with stated durability of up to about one year. It adds UV protection, helps inhibit bacterial and fungal growth, reduces friction marks, and keeps leather breathable and soft.

Key features

  • Silicon nanoparticle ceramic coating for leather
  • Stated durability up to about 1 year
  • Flexible, near-invisible protective film
  • UV protection
  • Helps inhibit fungi and bacteria
  • Reduces friction marks and jean transfer
  • Stain resistance against common liquids and dirt
  • For natural leather, synthetic leather, and soft-touch panels

Usage

  1. Clean the leather with a leather cleaner, then wipe with a damp microfiber to confirm the surface is residue-free.
  2. Let the leather air-dry or speed-dry with a dry microfiber, since moisture can interfere with adhesion.
  3. Apply a few drops of V-Leather to the included foam applicator and spread evenly across a section no larger than 50×50 cm, checking for streaks.
  4. For a matte look, buff with a dry microfiber; for a satin look, leave as applied. A second coat is possible after 30 minutes; partial cure is 6 hours and full cure is 72 hours.

다른 이름: 보닉스, Vonix, Vonixx V-Leather, 보닉스 브이 레더

View in English

출처

관련 제품

Vonixx의 다른 제품

같은 카테고리(Leather Sealants) 제품

더 보기