Vonixx V-Energy PRO Dilution Ratios & User Guide

Vonixx V-Energy PRO dilution ratio and pH specification chart

브이-에너지 프로

Vonixx V-Energy PRO — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/vonixx/v-energy-pro

Vonixx 브이-에너지 프로 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/vonixx/v-energy-pro

V-Energy PRO is a high-SiO2 semi-permanent ceramic coating designed for engine bay surfaces. Applied to plastics, metals, rubber, and hoses, it forms a flexible protective film that refreshes the look, repels dirt, and resists high temperatures to help reduce early oxidation and corrosion on metal parts, leaving a dry, glossy finish. Each bottle covers up to around 5 engine bays with stated durability of up to 4 years.

V-Energy PRO는 엔진룸 표면용으로 설계된 고함량 SiO2 반영구 세라믹 코팅제입니다. 플라스틱, 금속, 고무, 호스에 도포해 외관을 살리고 오염을 차단하는 유연한 보호 피막을 형성하며, 고온에 견뎌 금속 부품의 조기 산화·부식 위험을 줄이고 건조한 광택 마감을 남깁니다. 한 병으로 약 5개 엔진룸에 사용할 수 있으며, 지속 기간은 최대 4년까지로 안내됩니다.

Brand
Vonixx
Categories
Exterior : Coating
Primary dilution
RTU
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU1:0

Usage

  1. Clean the engine bay thoroughly and let it dry completely.
  2. Decontaminate all surfaces with an IPA-based surface prep and a microfiber towel to remove residue and excess product.
  3. Apply the product across the surface with a foam applicator or spray gun.
  4. On plastic parts, optionally buff with a clean dry microfiber towel for a less shiny look.
  5. If a second coat is needed, apply 4 hours after the first; partial cure is 6 hours and full cure is 72 hours, keeping the vehicle dry during that time.

핵심 특징

  • 고함량 SiO2 반영구 엔진룸 세라믹 코팅
  • 지속 기간 최대 4년으로 안내
  • 고온 내성
  • 금속 부품의 산화·부식 위험 감소
  • 플라스틱·금속·고무·호스에 적용 가능
  • 1병으로 약 5개 엔진룸 작업 가능

사용법

  1. 엔진룸을 꼼꼼히 세척하고 완전히 건조합니다.
  2. IPA 기반 전처리제와 극세사 타월로 모든 표면의 잔여물과 초과 제품을 제거합니다.
  3. 폼 어플리케이터 또는 스프레이 건으로 전체 표면에 제품을 도포합니다.
  4. 플라스틱 부품은 깨끗한 마른 극세사 타월로 닦아 광택을 줄일 수 있습니다.
  5. 2차 도포가 필요하면 1차 도포 4시간 후 진행하며, 부분 경화 6시간, 완전 경화 72시간 동안 차량을 건조 상태로 유지합니다.

Also known as: 보닉스, Vonix, Vonixx V-Energy PRO, 보닉스 브이-에너지 프로

한국어로 보기

Sources

Related products

More from Vonixx

More Coating products

Explore more