Sinergy Paint
시너지 페인트
Sinergy Paint is an easy-to-apply spray coating that protects paint for up to 12 months using Vonixx's proprietary CARBOSILOXY nanotechnology, where carbon forms a covalent bond with the clearcoat and silicon dioxide provides additional physical adhesion. The formula delivers strong water beading, reduced friction, and minimized light scratch formation, and it is also compatible with PPF, vinyl wraps, and as a maintenance layer over existing ceramic coatings.
시너지 페인트는 보닉스 고유의 CARBOSILOXY 나노기술이 적용된 스프레이 코팅제로, 탄소가 클리어코트와 공유결합을 형성하고 이산화규소(SiO₂)가 물리적 부착력을 더해 최대 12개월의 도막 보호를 제공합니다. 강력한 발수 효과, 마찰 감소, 경미한 스크래치 최소화 성능을 발휘하며 PPF, 랩핑 필름 위에도 사용할 수 있고 세라믹 코팅 위 유지 관리 제품으로도 활용됩니다.
- Brand
- Vonixx
- Categories
- Exterior : Coating
Key features
- CARBOSILOXY nanotechnology with dual chemical and physical bonding
- Up to 12 months of paint protection
- Easy spray-wax application method
- Short curing time of approximately 1 hour
- Strong water beading and dirt repellency
- Reduces friction and minimizes light scratches
- Compatible with PPF, vinyl wraps, plastics, and headlights
- Usable as a maintenance layer over ceramic coatings
Usage
- Ensure the paint is clean and decontaminated; an IPA prep wipe is recommended to remove any wax or sealant residue.
- Spray a small amount of the product onto a clean, dry microfiber towel.
- Apply in straight movements over an area not exceeding 60 x 60 cm (2' x 2').
- Immediately buff off with a second clean, dry microfiber towel.
- Continue section by section until the entire vehicle is complete.
- For better results, apply a second layer after allowing approximately 1 hour of cure time.
핵심 특징
- 화학적·물리적 이중 결합 CARBOSILOXY 나노기술
- 최대 12개월 도장면 보호
- 스프레이 왁스 수준의 간편한 시공
- 약 1시간의 짧은 경화 시간
- 강력한 발수 및 오염 방지
- 마찰 감소 및 경미한 스크래치 최소화
- PPF, 랩핑 필름, 플라스틱, 헤드라이트에도 적용 가능
- 세라믹 코팅 위 유지 관리 제품으로 활용 가능
사용법
- 도장면이 깨끗하고 오염이 없는 상태인지 확인하며, IPA 제품으로 잔여 왁스·실란트를 닦아내는 것을 권장합니다.
- 깨끗하고 건조한 극세사 타월에 소량의 제품을 분사합니다.
- 60 x 60 cm 이내의 구역에 직선 방향으로 도포합니다.
- 즉시 다른 깨끗하고 건조한 극세사 타월로 닦아냅니다.
- 차량 전체가 완료될 때까지 구역별로 반복합니다.
- 더 나은 효과를 원하면 약 1시간 경화 후 두 번째 레이어를 추가 시공합니다.